Advertisement
Quick Links
Advertisement
Summary of Contents for SmartH SKCR018H
-
Page 9: Set Up Router
Set Up Router Please keep network available 2.4GHz 5GHz The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is connected to the WiFi network. Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi. -
Page 10: Ready To Work
Ready to work Manually add Wi-Fi devices in EZ mode Step1:Make sure the power is connected to the fan before using.Plug the Fan into an AC 110V~50Hz main soutlet. Step2:Press and hold the power button for 5seconds, Make the numbers in the display flash quickly(rapid blink) •... -
Page 11: Customer Support
lnstall Free App Download APP: scan the QR code below to download and install. Register and login: open the "MySmartH" APP to register and login according to the prompts. Customer Support... - Page 12 Two pairing modes are provided in the MySmartH app. The Wi- Fi Easy Connect (EZ) mode is the default mode, and the access point (AP) mode is the compatible mode. The user can tap the pairing mode drop-down list in the top-right corner of the page to switch between the pairing modes.
- Page 13 3. Choose WiFi and enter password and tap “Next”; 4. Confirm that the red indicator light of the water leak dtetctor is flashing quickly and tap"Next";...
- Page 14 Smart Fan 5. Tap “Done”;...
- Page 15 Now your Bladeless Fan Heater is successfully added to MySmartH app.
- Page 16 Manually add Wi-Fi devices in AP mode If the connection fails, please try AP mode If a dual-band network that supports both 2.4 GHz and 5 GHz bands is used, the AP mode can be used to add devices. In AP mode, follow the instructions to enable the indicator to blink slowly, select Confirm the indicator is blinking slowly, and then tap Next.
- Page 17 Ready to work Manually add Wi-Fi devices in AP mode Step1:Let the number Light Flash(blink slowly),If the number light of the Fan is flashing fast, please continue to press and hold the Power button until the fast flashing turns to slow flashing.
- Page 18 Manually add Wi-Fi devices in AP mode 1. Open "MySmartH" APP, press the'+' in the upper right comer of the main screen; 2. Choose "Home Appliance"、click "Bladeless Fan Heater.
- Page 19 3. Choose WiFi and enter password and Tap “Next”; 4. Tap"AP Mode"in upper right screen;...
- Page 20 5. Tap “Next”; 6. Click"SmartLife-1DD4"; In AP mode, on the Wi-Fi setting page of the mobile phone, find the Wi-Fi hotspot starting with SmartLife.
- Page 21 7.Tap the Wi-Fi hotspot to connect the mobile phone to it. 8.After a successful connection, go back to the app to start pairing.
- Page 22 Manually add Wi-Fi devices in AP mode Smart Fan The device pairing page on the app appears again and the pairing process continues. 9. Tap “Done”...
- Page 23 Now your Bladeless Fan Heater is successfully added to MySmartH app.
Need help?
Do you have a question about the SKCR018H and is the answer not in the manual?
Questions and answers