IMAGO Chip Shot Manual page 68

TROUBLESHOOTING- BAD IMAGES
• OUT OF FOCUS
• OUT OF FOCUS WHILE MACHINE IS STILL:
• ROTATE THE CAMERA LENS (EASIEST TO DO THIS BY ROTATING THE DOME LIGHT ITSELF)
• TAKE IMAGES PERIODICALLY TO ANALYZE THE FOCUS USING THE MANUAL JOG MENU'S CAMERA
FUNCTION
• OUT OF FOCUS WHILE MACHINE IS RUNNING:
• DROP ACCELERATION, DEACCELERATION, MAX VELOCITY IN MOTOR SETTINGS
• LOW/HIGH LIGHTING
• ADJUST EXPOSURE: DIAL ON THE CAMERA ITSELF
• ADJUST GAIN: SPINVIEW SETTINGS
• CROOKED
• THE TRAY WAS NOT SET IN PROPERLY. FOLLOW THE ALIGNMENT INSTRUCTIONS DETAILED IN THE
SYSTEM OPERATION SECTION