Not only does the PEQ-2 offer Low Shelf boost and cut control and High Shelf cut, but it also has a High Peak Boost with a completely variable Q (Bandwidth) setting that spans from Sharp to Broad to cover any needs. What’s more, the range of Boost actually varies depending on what you’re selected Bandwidth setting is to offer a very smooth and natural...
GETTING STARTED FRONT ORANGE ACTIVITY LIGHT GAIN KNOB LF BOOST GAIN KNOB LF DROOP GAIN ADJUSTMET TRIMMER GAIN KNOB HF BOOST Indicates EQ is in “ON” 0 to 16 dB 0 to 18 dB -12 dB to +1.6 dB range 21 to 12.5 dB depending on the BANDWIDTH setting GAIN KNOB HF DROOP...
Page 10
MIX BUSS INSERT LANG PEQ-2A LANG PEQ-2A LEFT & RIGHT LEFT & RIGHT LINE INPUTS LINE OUTPUTS PROCESSED STEREO MIX STEREO MIX DAW LEFT & RIGHT LEFT & RIGHT LINE INPUTS LINE OUTPUTS AUDIO INTERFACE MONITOR SPEAKERS THUNDERBOLT COMPUTER...
Page 11
MASTERING HA-609A LEFT & RIGHT LINE OUTPUTS HA-609A COMPRESSOR LEFT & RIGHT LINE INPUTS LANG PEQ-2A LEFT & RIGHT LINE OUTPUTS COMPRESSOR SUCCESSOR LEFT & RIGHT LINE OUTPUTS MASTERED MIX STEREO MIX DAW LEFT & RIGHT LEFT & RIGHT LINE INPUTS...
SPECIFICATIONS • Line input impedance: 2400 Ω bridging, transformer balanced and floating. • Output impedance: Transformer balanced and floating, to drive a load of 600 Ω. • Maximum output: Greater than +26.5 dBu into 600 Ω (internally terminated). • THD+N Ratio: 0.02 % @ 1 kHz 24 dBu, all control CCW*. •...
There are too many sub sonic frequencies going on. Use some LF Droop to cut at 20 or 50 Hz to clear things up a bit. * For any further doubts or questions please get in contact with us at: support@lang-electronics.com...
2 years to the original purchaser. In the event of such defects, the product will be repaired without charge or, at our option, replaced with a new one if delivered to Lang Electronics Inc. prepaid, together with a copy of the sales slip or other proof of purchase date.
Need help?
Do you have a question about the PEQ-2 and is the answer not in the manual?
Questions and answers