Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Deity SPD-1
- Page 1 Smart Power Distributor Product Manual English...
-
Page 2: Fcc Compliance Statement
Foreword Thank you for purchasing the Deity Smart Power Distributor SPD-1 Instructions Please read this product manual carefully. Keep this product manual. Always include this product manual when passing the products on to third parties. Heed all warnings and follow all instructions in this product manual WARNING: Do not place the product near any corrosive chemicals. -
Page 3: Intended Use
Intended Use Intended use of the Deity Smart Power Distributor SPD-1 includes: The user has read the instructions of this manual. The user is using the products within the operating conditions and limitations described in this product manual. -
Page 4: Connector Pinout
Nomenclature Reversible Belt Clip Power Input LED Indicator USB-A Output Port Group I Power Switch Color Display Group II Power Switch TA4 Power Input Connector A USB-C Input Port Power Output Group I Power Output TA4 Power Input Connector B Group II Connector Pinout Power Output Connectors... - Page 5 Accessories For The SPD-1 2. SPD-HRBATT 1. SPD-T4BATT Compatible with 4-Pin Hirose to TA4F to Smart Battery Cup Smart Battery Cup 3. SPD-HRHR 4. SPD-T4DT Compatible with 4-Pin Hirose TA4F to D-Tap to 4-Pin Hirose 5. SPD-HRDC 6. SPD-HRISO Compatible with 4-Pin Hirose Compatible with 4-Pin Hirose to to 5.5mm DC Plug（DC5525)
- Page 6 Attaching the Clip Installations and Use The SPD-1 is a compact and lightweight power distribution box with 6x protected outputs, 1x USB-A 5V output, 2x locking switches and a full featured fuel gauge. The fuel gauge provides all the information required to monitor the battery’s state of charge (voltage, current, power,etc…).
- Page 7 USB-C OUT 5V 2. Use in small location carts...
-
Page 8: Functions And Operation
This display shows all the needed information regarding the state of charge of the battery. * When the SPD-1 is connected to 2 smart batteries (if connected to a no-smart battery, only the battery‘s voltage will be displayed). The micro controller in the SPD-1... - Page 9 2) Overload Warning Display A warning message pops up when the SPD-1 is overloaded from either the TA4A and/or TA4B input. There is no output for Power Output Group I & II. 3) Home Screen Responses to Different Power Inputs 12.00...
- Page 10 * When the power input falls below 6V, the SPD-1 will turn off automatically. * When the power input goes up to 24V, the SPD-1 will turn off automatically. * When the power input is over 7V，the SPD-1 can turn on.
-
Page 11: Specifications
Specifications • Built-in protection circuit for safety. • All anodized aluminum CNC machined and extruded enclosure with laser engraving. • 1.1’’ TFT Color Screen • 12V-18V Suggested voltage range • 2x TA4 inputs • 1x USB-C input • 2x Power Circuits (Group I & II) •...
Need help?
Do you have a question about the SPD-1 and is the answer not in the manual?
Questions and answers