Table of Contents
Advertisement
Quick Links
MTM750
My True Miles, LLC
Phone
1.800.434.1101
Email
info@mytruemiles.com
Website
MyTrueMiles.com
CONTENTS
Change Log -- - - -- - -- - -- - - -- - - - - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - -- - -- - - - - - -- -
Identification -- - -- - - -- - -- - - -- - - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - -- - - - -- - - - - - -
Hardware -- - - -- - -- - - -- - -- - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - --- - - - - - -- - - -
Accessories -- - - -- - -- - -- - - -- - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - -- -- - - - - - -- - -
Pre-Installation - - -- - -- - -- - - --- - - - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - -- -
Steps --- - -- - - -- - -- - -- - - -- - - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - -- - -- - - - - - -- - -
Installation --- - - -- - -- - -- - - -- - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- -- - - - - - -- - - - -
Things to do before installation - - - -- - - - - -- - - - - - -- - - - - - -- - - - - -- -- - - - - - -- - - - -
Camera Installation - -- - -- - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- -- - - - - -- - - - -
Connect harnesses -- - -- - -- - - - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - -- - -- - - - - - -- -
Connect VS800 to MTM750 - - - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - -- - - - -- - - - - - --
Connect MTM750 to power - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- - - -- - - - -- - - - - --
Connect Driver Initiated Button to MTM750 harness --------- - - - - -- - - -- - --
VS800 Setup --- - -- - - -- - -- - -- - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - --- - - - - - -- - - - -
Setup Camera Via App - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- -- - - - - -- - - - - - -
Camera Setup - - -- - -- - -- - - - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - -- - -- - - - - - -- -
Troubleshooting - - -- - - -- - -- - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - --- - - - - - -- - - - -
Troubleshooting Camera - - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- - - -
Troubleshooting MTM750 - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - -
System Diagram - -- - - -- - -- - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- -
Functional Description - - -- - -- - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - -- - - -
Camera Events & Triggers - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - --
MTM750 Events & Triggers - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - -
Setting Video Alerts on UI - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- - - - - - -- - - - - - -- - - -
connecting all the components & power connections ---------
02
02
02
02
03
03
04
04
04
06
06
06
06
- - -- - - - - - -- - - - - - --
06
06
- - - - -
06
06
08
08
08
11
11
11
12
13
13
14
14
01
Page
Advertisement
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Summary of Contents for MTM MTM750
-
Page 1: Table Of Contents
Connect MTM750 to power - - - - -- - - - - - -- - - - - - -- - - - - - -- - - - - -- - - -- - - - -- -... -
Page 2: Change Log
Updated LED indicators, added UI interface, added infor- 04/23/21 Alethea Braham mation on WiFi connection during installation. 07/22/21 Add force ignition for camera install Alethea Braham MTM750 09/28/21 Add more details to installation process Alethea Braham 12/08/21 Added Engineering feedback to install guide Alethea Braham... -
Page 3: Pre-Installation
This diagram shows how the VS800 is connected to the MTM750 via the standard P309 Harness. When the MTM750 & VS800 are ordered, all the standard cabling arrives as part of the order. No extra har- nesses are need for a typical installation. -
Page 4: Installation
5.Put the cover back on without the “screw” as it’s Easier to “mount the camera to the windshield” with the cover ON. MTM750 6.Set aside the screws to avoid losing them. 7.Loosen up the lens screw (in the middle of camera) to be able to move the lens up and down. - Page 5 •Carefully Install the cable retainer. (i.e. it prevents the driver from being able to unplug the cable) •Install cable clips as needed if the cable can’t be hidden MTM750 safely under the headliner •Do Not Reinstall the cover yet! Remove adhesive backing and fi rmly press cam- era into place.
-
Page 6: Mtm750 Installation
Splitter. Black – Chassis Ground Connect OBD-II adapter to OBD-II port on vehicle and then connect to MTM750 My True Miles, LLC When the Option B is chosen, it will look like this when the OBDII plug is positioned correctly. - Page 7 GPS acquiring fix info@mytruemiles.com Medium Flash Device unlocked (3x4flashes) Searching for network Searching for satellites Website MyTrueMiles.com If you are not seeing the lights working properly on the MTM750 , then you can use the “power button” to reset the MTM750. Page...
-
Page 8: Vs800 Setup
2.If the BLUE LED on the VS800 is not on, then press the EZ750’s button for 6 seconds or until the Green LED on the MTM750 lights up, then let go. The BLUE LED on the VS800 will turn on and the APP setup can be completed. - Page 9 MTM750 Select camera WiFi network (camera serial number) & Enter password (located on camera) Select Installed if driver facing camera was installed Note: If you do not install the in-ward (Driver) camera and it is installed at a later time you will need to go over the entire install/alignment process again.
- Page 10 Once you have reached this screen your configuration is complete and installation history is sent to the server. Phone 1.800.434.1101 At this point the camera will switch to the WiFi Client on the MTM750 you will not see the camera on your device anymore. Email info@mytruemiles.com...
-
Page 11: Troubleshooting
• If the Green LED on the VS800 is not on during IGN on, then press the MTM750’s button for 6 seconds or until the Green LED on the EZ750 blinks. The Green LED on the VS800 will turn ON for the APP setup to be completed. -
Page 12: Troubleshooting Mtm750
•Virtual Bumper: “Beware of front vehicle” / 2 fast chimes •Stop Sign Violation: “Start event recording” / •Red Light Violation: “Start event recording” / TROUBLESHOOTING MTM750 The LEDs on the device will flash to indicate specific error(s) MTM750 Error Codes To check the system status press and hold the multi-function button for 2-4 seconds;... -
Page 13: Functional Description
•Rolling-Stop Violation: Not sopping for the expected time at a Stop signal. Violation under Califor- nia law (CVC22450) •Collision Risk: A safe distance to avoid collision is not kept. The Camera will trigger the events when the following conditions are met. MTM750 Event Sedan (Normal) Truck (Normal) Event triggers when driving 15 ~ 30seconds with TTT≤0.4... -
Page 14: Mtm750 Events & Triggers
MTM750 E VENTS & TRIGGERS The following are the events the EZ750 detects and triggers a video to be recorded. •Harsh Acceleration •Harsh Brake •Harsh Left •Harsh Right •Harsh Cornering •Crash Light vehicle settings are: •harshLightPeriod – Current default 1000 ms •harshLightBrake - Current default 450 miliGs... - Page 15 MTM750 Note: if multiple installs are taking place, the reseller should set their technicians and/or installers phone up for the Driver Initiated button alert to their mobile phone…..then it will pop on their phone and will know the installation was completed successfully.
Need help?
Do you have a question about the MTM750 and is the answer not in the manual?
Questions and answers