MstrWood Arch + Ramp User Instruction

Arch + Ramp User Instruction
What's included:
Parts:
2х
Arcs
9х
Rungs
A Ramp with rocks or ladders does not need assembly
1. Lay the one arc and rungs according to the colors in the order
you like. Start assembly from the one of the top rung.
2. Insert screws (9 pcs / 7 x 70) into the matching holes of the arc.
3. Firmly press the rung and tighten the screws.
The most important thing: don't twist parts completely!
The design should not be tightly fixed.
4. Firmly press other arc to the rungs and assembly the arch
with other screws (9 pcs / 7 x 70).
Attention! We use natural materials only! Сlamping force
must be taken into account wood screw.
Excessive force ightening the screw will cause deformation
wood surface.
5. When all the screws are in, place the arch on a flat base
and press on it from above. The arch will take the correct position.
All details will fall into place.
7. Tighten the screws fully, starting at the one of the top rung
and working to the base evenly on both arcs.
6. The arch is assembled.
Tools and fixing:
18х
1х
Allen key
MstrWood
CAUTION
CONTAINS SMALL PARTS
Adult supervision required
NOTE: Ensure dowels
are poshed home in their
recesses before tightening
screws ‒ a gentle tap with
Screws
a small rubber mallet or the heel
(7 х 70)
of your hand should help.
For assembly, it is
recommended to use a
screwdriver or an electric
screwdriver.
NOTE: All our products can
be used outdoors only
in dry weather!
RECOMMENDATIONS:
● The climbing set of arch
and ramp should be
assembled by
a competent adult.
● Regular checks should
be carried out before
and during use
to ensure safe use
the set.
● Watch your children
during games! Always
be vigilant during
games!