In the Box 1 x projector 1 x power cord 1 x HMDI cable 1 x RCA / AV 1 x remote control connector Safety Instructions Please read this guide carefully before operating the machine. For future reference, please keep this guide in a safe place. Do not look straight at the projector lens during operation.
Page 3
Introduction to Parts Functions: 1. Power button 8. Left key 2. Return key 9. Up key 3. Signal source 10. Keystone correction 4. Menu 11. Zoom adjustment 12. IR : Remote control signal receiver 5. Down key 6. OK 13. Power socket 7.
Page 4
Remote: 1. Power on / off 2. Menu 3. OK 4. Left / back 5. Down / next file 6. Play / pause 7. Volume control / mute 8. Video source 9. Up / previous file 10. Right / fast forward 11.
Page 5
Connect the projector to your video source, such as Blu-ray player, TV, game console, or other devices. To turn on / off, press and hold the power button until the power indicator turns green. Wait 10 seconds for it to warm up. Page 4...
Adjust the projector angle by the lifting leg and adjust the focus using the focus wheel and keystone adjustment. Using the Projector Switch the input source to “DMP” to browse media files and select the video source using the remote or navigation buttons at the top of the projector. Page 5...
Page 7
To adjust the input source, press the source button on the remote control. Press “OK” to select your source. To adjust the Sound, Picture, and System settings, select “SETTING” from the main menu. Page 6...
Page 8
Screen Mirroring Mode Note: Apple devices require iOS 7 or above, Android devices require Android 4.2 or above. Select the “Screen Mirroring” from the input source, the following page will show up. Connect the projector to the same Wi-Fi network as the mirroring device.
Page 9
Via Airplay (Apple OS device) Connect your iPhone, iPad, or iPod Touch to the same Wi-Fi network as your projector. Open Control Center: On iPhone X or later or iPad with iPadOS 13 or later: Swipe down from the upper-right corner of the screen. On iPhone 8 or earlier or iOS 11 or earlier: Swipe up from the bottom edge of the screen.
Page 10
Via Smart View (Android) Swipe down from the top screen to open the “Quick panel”, then, tap on the Smart View icon. Select “DW720PP-xxxxxxx” from the list of available devices. (If you cannot find the projector from the list, make sure you have connected to the same Wi-Fi network.) Select “Start now”...
Need help?
Do you have a question about the PremProjectorUS and is the answer not in the manual?
Questions and answers