In the Box 1 x bone conduction 1 x magnetic headphones charging cable Safety Information • Read and follow the instructions carefully. • Prolonged exposure to high volume levels could cause permanent hearing damage. • Do not use these headphones in corrosive liquid, such as salt water. •...
Page 3
Introduction to Parts 1. Function keys 2. Microphone 3. Indicator light 4. Magnetic charging port 5. Headphone drum Wearing Guide Put the headphones around your head and move the drums around your ears as shown. Adjust the headphones to get the best spot for hearing.
Page 4
Upon first use, press and hold the Function key for 3 seconds. The indicator light will flash white and blue, meaning the headphones are on. Search for “Dartwood BC-X8” in the Bluetooth menu of your mobile device. You will hear “connected” once it is paired.
Page 5
Charging 1. Fully charge the headphones before using them for the first time. 2. Only use the magnetic charging cable provided to charge the headphones. 3. Snap the magnetic end to the charging port and connect to the power source. 4.
Function Keys Press once: Volume down Press twice: Play previous song Press and hold: Turn gaming mode on / off (BT mode only) Press once: Volume up Press twice: Play next song Press and hold: Activate Siri / voice assistant (BT mode only) Page 5...
Page 7
Function Key Press once: Play, pause, answer a call (BT mode only) Press twice: Switch to music / Bluetooth mode Press and hold: Power on / off Indicator Light Light / Color Status Alternating white Ready to pair and blue Blue light slowly Successful connection and waiting flashing...
Frequently Asked Questions Why can’t I pair my headphones? Make sure the indicator light is flashing white and blue. If you have paired the headphones before, turn off the paired device first. If you are not sure which devices are connected, go to a room without any other devices - it will be easier to pair a new one.