Advertisement
Table of Contents
User Guide
&
Product Information
Content of Schaller Signum Bridge
–
1 Signum bridge
–
2 Signum locking studs
–
2 Signum locking stud bushings
–
1 Signum locking key
–
2 pairs of Allen screws (6 mm / 10 mm)
with the 6 mm pair pre-installed
–
1 Allen key
– 2 –
Before you get started please follow
these important instructions:
Never attempt to turn height adjustment
screws/studs while bridge is locked!
Always loosen locking hex nuts before
adjusting bridge height!
Lock and open hex nuts according to laser
inscription on Signum locking key.
Adjust overall height of bridge - i.e. string
action - just like on any regular wraparound
bridge or stop tailpiece.
tighten
loosen
– 3 –
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Schaller Signum Bridge
- Page 1 Content of Schaller Signum Bridge Before you get started please follow these important instructions: – 1 Signum bridge Never attempt to turn height adjustment screws/studs while bridge is locked! – 2 Signum locking studs Always loosen locking hex nuts before –...
- Page 2 Install and Adjust Your Signum Bridge Use Signum locking key for fastening Adjust individual string intonation back and locking hex nuts only just lightly to prevent forth by way of the string saddle screws. bridge from tilting. Lock bridge but do not overtighten locking...
Need help?
Do you have a question about the Signum Bridge and is the answer not in the manual?
Questions and answers