Table of Contents
Summary of Contents for Ambroise GENUX 2 ORTHOSIS
-
Page 1: User
MANUAL GENUX 2 ORTHOSIS ® Twekkeler Es 24, 7547 SM Enschede, The Nederlands tel: +31 53 4302836 | info@ambroise.nl | www.ambroise.nl www.youtube.com/AmbroiseHolland | www. facebook.com/AmbroiseHolland USER PRODUCT INFORMATION PROFESSIONAL... -
Page 2: Table Of Contents
GENUX 2 KNEE ORTHOSIS ..............................................13 INFORMATION FOR THE PROFESSIONAL ........................................13 CONTRAINDICATIONS: ..............................................13 ADJUSTMENT OF THE PELOTTE CARRIER ........................................13 PHOTO MEASUREMENT GENUX ..........................................14 PLACING PELOTTES ................................................15 User information | +31 (0)53 4302 836 | info@ambroise.nl | www.ambroise.nl GENUX.2023.01... -
Page 3: Genux 2 Knee Orthosis
Always consult your physician about the best options in your individual case. User information | +31 (0)53 4302 836 | info@ambroise.nl | www.ambroise.nl GENUX.2023.01... -
Page 4: The Genux 2 - Unloading
The lower forces of the brace on the leg make it more comfortable, but also allow us to optimize the weight of the brace without compromising the rigidity of the structure of the brace. So, in short: it works better and is more comfortable because it’s longer. User information | +31 (0)53 4302 836 | info@ambroise.nl | www.ambroise.nl GENUX.2023.01... -
Page 5: The Genux 2 - Dynamic 4 Point Balancing
In the earlier model (the GENUX I) we’ve proven the need for skin migration underneath the brace just above the knee at the front side of the leg in flexing the knee to prevent the skin from pulling the brace downwards (see https://www.ambroise.nl/en/leg- User information | +31 (0)53 4302 836 | info@ambroise.nl | www.ambroise.nl... -
Page 6: The Genux 2 - Adjustable Knee Joint
The orthotist also collects all the information needed for a correct order, for example, the required type and your personal information. With this information, the orthotist can order a GENUX 2 at Ambroise. At Ambroise in Enschede, your GENUX 2 is then manufactured for you, based on the data provided by the orthotist. -
Page 7: Donning The Genux
GENUX. This drawing is used during the production process to choose the right sizes and shapes. When the GENUX 2 is complete, Ambroise sends the orthosis to the orthotist. Your orthotist will then invite you to an appointment where you can fit the knee orthosis. During this appointment, the orthotist will also need to adjust some elements of your GENUX 2. -
Page 8: Doffing The Genux 2
(see photo series ‘opening the clips’ on the following page). The clip that attaches the GENUX 2 to the calf strap is easy to loosen by pressing the two pins from both ends inwards User information | +31 (0)53 4302 836 | info@ambroise.nl | www.ambroise.nl GENUX.2023.01... - Page 9 - when brace is on the leg. 1. Place the top of your finger behind the flap of the clip. 2. Open the clip entirely until it is in line with the rest. User information | +31 (0)53 4302 836 | info@ambroise.nl | www.ambroise.nl GENUX.2023.01...
-
Page 10: First Use Of The Genux 2
PHOTO MEASUREMENT Ambroise not only pays attention to the innovation of its products, but also to the way they are individually measured. Every GENUX 2 is custom made based on two digital photos using the Ambroise Photo Measurement Technique. (See Figure 7). -
Page 11: Delivery
The delivery time of a GENUX 2 orthosis is very short despite all these steps, even though it is a fully custom made brace. The orthosis can be delivered within 2 (working) weeks (if approved by the insurance). -
Page 12: Genux 2 Knee Orthosis
GENUX 2 settings in your case is the best. Perhaps, despite all the guarantees, something went wrong. Your orthotist can judge whether he can perform the repair or that your GENUX 2 has to be sent to Ambroise. Also, your orthotist can investigate if your situation may have changed, so that GENUX 2 is no longer the best solution for you. -
Page 13: Genux 2 Knee Orthosis
1. Remove the pelotte (see page 13) 2. Unscrew the locking screws of the FS cable in the connector 3. Use the Ambroise bending pliers to bend the pelotte carrier 4. Reattach the FS cable 5. Place the pelotte back On our YouTube channel www.youtbube.com/AmbroiseHolland you can find a tutorial how to adjust the pelotte carrier. -
Page 14: Photo Measurement Genux
Write the measurements on the measurement form. Send the completed form to: GENUXorder@ambroise.nl You can order the photo measurement poster by sending an email to info@ambroise.nl Order code 300187 for the UTX/GENUX background kit, including markers. User information | +31 (0)53 4302 836 | info@ambroise.nl | www.ambroise.nl... -
Page 15: Placing Pelottes
5. Remove the yellow cover to stick the foam to the surface 6. You can find the size of the shell on the inside of the outer and press tightly. shell. User information | +31 (0)53 4302 836 | info@ambroise.nl | www.ambroise.nl GENUX.2023.01...
Need help?
Do you have a question about the GENUX 2 ORTHOSIS and is the answer not in the manual?
Questions and answers