SPECIFICATIONS
Electrical Specifications
Mechanical
Environmental
Warrantied Operating Temperature
Compliance
General
SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465
nLight-Pathway-nPWDMX-SNAPSHOT-DIN-Manual
nPWDMX SNAPSHOT DIN
nLight® DMX512 and sACN Controller
INSTRUCTIONS
Input Ratings
PoE Class 2 Device
24VDC power input
7W maximum power consumption
nLight Output Ratings
16-24VDC, 40mA per RJ-45 Port (80mA total)
Dimensions
6.25" W x 4" H x 1.85" D (159mm W x 103mm H x 47mm D)
Mounting
35mm x 7.5mm DIN rail
Connection Type
RJ-45 nLight Network Ports (2)
DMX512 Ports (2)
Dry Contact Closure Input (1)
Ethernet Port - 10/100 Mbps Ethernet Network Port (PoE) (1)
32º to 113ºF (0º to 45º C)
Relative Humidity
5-95%, Non-Condensing
Standards/ Ratings
RoHS 2011/65/EU + A1 2015/863
Regulatory
FCC Title 47 CFG Part 15 B Class A
ANSI E1.11 DMX512-A R2013
ANSI E1.20 RDM
ANSI E1.33 RDMnet
ANSI E1.31 sACN - Streaming ACN
IEEE 802.3af Power-over-Ethernet
California Title 1.81.26, Security of Connected Devices
Notes
1. Ports configured as output ports are RDM controllers when used with Pathscape or E1.33 RDMnet. RDM cannot
Standards/Ratings
System Component to aid in compliance with Title 24, ASHRAE 90.1, IECC
C
US LISTED
READ AND FOLLOW ALL SAFETY INSTRUCTIONS!
https://nlight.acuitybrands.com/
- Remote Device Management
1
1
pass from an input port to an output port.
WARRANTY
5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
© 2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/10/2022
1 of 131
Need help?
Do you have a question about the nLight nPWDMX SNAPSHOT DIN and is the answer not in the manual?
Questions and answers