General Information; Transportation; Storage - Pellas X R16 User Manual

PellasX burner requires installation according to this user's manual. Following advice
included in this USER'S MANUAL will guarantee safe functioning and installation of the device.
All doubts and ambiguities as to condition of equipment or given functions of parts of burner
should be reported to the seller in order to get explanations.
Installation of burner should be carried out by a service person who is
authorized and trained by the producer.
Improper installation may lead to loss of guarantee.
Every user of heating boiler devices should know and comply to all local rules of law.
Particularly before activating a heating installation in accordance with construction law.
The seller does not bear any responsibility for burner installation which is not in accord-
ance to valid local regulations and for lack of required protocols and permissions.
PellasX burner is packed in a carton with a divider (burner with a controller,
mounting flange and a feeder). The device must be carried in packaging, according to
markings on the parcels. During transportation it should be protected against unfavorable
environmental conditions (snow, rain, dust) and it should not be exposed to shocks, hits and the
packaging should be protected against damages.
Loading and unloading must be carried out in a way which does not expose the devices to
shocks. Improper loading, unloading and transportation (throwing, rapture sliding, crushing
with other heavy goods) can be a cause of damage to the product.
In case of damage of the packaging or product, the device should be subjected to
control in operation. In case when improper work of a fan or feeder motor is observed
(loud work, rubbing), possibly other faults, e.g. electronics (vanishing of characters on display of
LCD display) the burner should be sent to the service team in order to carry a reparation.
Consignments delivered by forwarding companies should be checked in presence
of the courier when the goods are delivered. In case of any incompatibilities a
protocol should be prepared.
PellasX burner should be stored in environmental conditions in accordance to following
guidelines:
• Dry and draughty rooms, free from substances like gases, corrosive liquids and fumes, which
are harmful to burner. Burner and feeder can not be stored in rooms where artificial
fertilizers, chlorinated lime, acids, chemicals etc. are kept.
• Best storage temperature +5°C to +40°C. Relative humidity should not exceed 70%.
• During

storage,

burner until final assembly should be kept in carton and on a pallet. Burners can be stored
and transported in three layers maximum.

1. GENERAL INFORMATION

Read the user's manual carefully before activating burner.
the device can

1.1. Transportation

1.2. Storage
not have direct contact with the floor. PellasX
3 | S t r o n a