Mid-Continent Instrument MD23-104 User Manual
  1. Manuals
  2. Brands
  3. Mid-Continent Instrument Manuals
  4. Measuring Instruments
  5. MD23-104
  6. User manual

Mid-Continent Instrument MD23-104 User Manual

True blue power gen5 lithium-ion battery monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Rev
Date
2
04/06/2022
3
12/19/2022
4
01/09/2023
This manual provides information intended for use by persons who, in accordance with current
regulatory requirements, are qualified to install this equipment. It is a supplement to the MD23
Installation Manual and Operating Instructions, p/n 9019161.
If further information is required, please contact Mid-Continent Instruments and Avionics.
Mid-Continent Instruments and Avionics
User Guide UG104
Revision 4
User Guide
MD23-104
True Blue Power
Gen5 Lithium-ion Battery Monitor
powered by
Updated user interface in 4.1.1.
Updated for addition of clock displays
Minor corrections. Clock configuration instructions added
For
Detail
Mid-Continent Instrument Co., Inc.
dba Mid-Continent Instruments and Avionics
9400 E. 34th Street N.
Wichita, KS 67226 USA
ph (800) 821-1212
www
Approved
www
mcico.com
BAW
KC
BAW
mcico.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD23-104 and is the answer not in the manual?

Questions and answers

Related Manuals for Mid-Continent Instrument MD23-104

Summary of Contents for Mid-Continent Instrument MD23-104

  • Page 1 It is a supplement to the MD23 Installation Manual and Operating Instructions, p/n 9019161. If further information is required, please contact Mid-Continent Instruments and Avionics. Mid-Continent Instruments and Avionics Mid-Continent Instrument Co., Inc. dba Mid-Continent Instruments and Avionics 9400 E. 34th Street N. User Guide UG104...

  • Page 2: Product Identification

    MD23 F L E X User Guide INTRODUCTION The model MD23 series FLEX Custom Function Display (“CFD”) is a standard 2-inch (2-¼”) ® panel-mounted instrument that displays multiple inputs in a configurable graphical presentation. FLEX ® is an off-the-shelf solution that is FAA and EASA TSO-approved with Level A design assurance software certification.

  • Page 3: Connector Pinout

    MD23 F L E X User Guide broadcast on the ARINC output as well. The clock and flight timer displays can each be enabled or disabled via configuration options. CONNECTOR PINOUT For standard pre-installation and installation instructions, including location, cable harness assembly, pneumatic inputs (if applicable), mounting, and others, please refer to the IM.

  • Page 4: Configuration And Setup

    MD23 F L E X User Guide CONFIGURATION AND SETUP Enter Configuration Mode by pressing and holding the Control Knob while applying power to the unit. For configuration and setup of standard unit functions, including dimming control options and dimming curve definition, please refer to the IM. Configuration settings specific to this CID are found within the User Configuration menu.

  • Page 5: Operation

    MD23 F L E X User Guide OPERATION For operation of standard unit functions, including the Options Menu, manual brightness control, Info page, and others, please refer to the IM. For details associated with the custom battery functions beyond those identified here, refer to the True Blue Power Install Manual and Operating Instructions for the specific battery associated with your application.
  • Page 6 MD23 F L E X User Guide (page 1 – two batteries) (page 2 – two batteries) Individual elements are defined as follows:  Page 1 o Status: Displays battery status: Active, Fault, Service, Invalid, or No Start o Charge %: Displays current state of charge. 0-100% ...
  • Page 7 MD23 F L E X User Guide 4.1.2 CLOCK DISPLAY SCREEN When enabled the clock display screen shows a traditional analog clock face with a sweeping second hand as shown in the image below. Pressing the Control Knob will display a prompt to set the time. To enter Set Mode, confirm by pressing again or the prompt will time out and return to normal operation after five (5) seconds.
  • Page 8 MD23 F L E X User Guide 4.1.3 FLIGHT TIMER DISPLAY SCREEN The flight timer display screen, when enabled, displays the local time (hours and minutes) and elapsed flight time (hours and minutes) using digital numeric displays. The local time is displayed in either 12- or 24-hour time format.
  • Page 9 MD23 F L E X User Guide (Set hours) (Set minutes) (Select 12/24 hour mode) When resetting the flight timer, select “PRESS TO RESET” and press the Control Knob from the popup menu. A five second countdown timer will start running. Press the Control Knob again to reset the flight time.

  • Page 10: User Options

    MD23 F L E X User Guide 4.1.5 USER OPTIONS Pressing and holding the Control Knob for three (3) seconds will activate the Options Menu. The manual brightness adjustment and info page are described in the IM. The Options Menu or User Options items will close and return to the active display after ten (10) seconds if no knob activity is detected.

Table of Contents