How to Install Note: Fully charge the spotlight before using. Make sure the labels on the back of the spotlight are right-side-up, and slide the spotlight into the top of the rubber casing. Make sure the Blink logo on the front and labels on the back of the Blink Cam are right-side-up, and slide the Blink Cam into the bottom of the rubber casing.
Page 4
Plug the split USB adapter cable into both the spotlight and Blink Cam USB ports. Plug the USB cable into the split USB adapter cable. Page 3...
Page 5
To turn on/off, flip the switch on the left side. Flip left for ON, right for AUTO. To adjust the timer, flip the switch on the right side: 30 seconds, 1 minute, or 5 minutes. Page 4...
Specifications Lumens: 100 lumens Angle: 120 degrees Power supply: 5V 1A Dimension: 1 x 2.2 x 1.4 in Connection: micro USB Operating current: 130 -150mA Motion sensing distance: 6.6 -16.4 ft Standby current: Battery life: 2-3 days Number of LEDs: Light temperature: 4000K Operating conditions:...
Page 7
Get More Support Scan the QR code below or email us at contact@wasserstein-home.com. Blink Outdoor Camera is not included. Blink Indoor Camera is not included. Wasserstein is a trademark of Dropcases Ltd. www.wasserstein-home.com Wasserstein is not affiliated with Immedia Semiconductor, LLC.