Advertisement
Quick Links
Advertisement
Related Manuals for Wasserstein Floodlight No-Drill Mount
Summary of Contents for Wasserstein Floodlight No-Drill Mount
- Page 1 Floodlight No-Drill Mount USER MANUAL...
- Page 2 In the Box 1 x no-drill mount 1 x extra sheet of mounting tape Applications This mount sticks to most smooth surfaces, such as tile, marble, metal, plastic, and wood. page 1 page 1...
- Page 3 Warning! • Read this manual and instructions carefully before use. Failure to follow the safety instructions may cause injury or damage to your property. • Do not stick to brick, stucco, or wall paper. • Extreme weather condition can shorten the life of the mounting tape and your camera, beware when mounting it outdoor.
-
Page 4: Installation
Installation 1. Check the view and test the trigger event from the Blink app before installing. 2. Make sure the surface you want to apply the mount to is smooth, dry, and clean. 3. Remove the protective film from the mounting tape without touching the adhesive. - Page 5 4. Carefully attach the mount to the surface in one go. Press and hold for 30 seconds to ensure maximum adhesion. 5. Wait for 24 hrs for the adhesive to fully dry. 6. Slide the floodlight onto the mount until it clicks.
-
Page 6: Removing The Mount
7. To remove the floodlight, press the tab on the mount down and slide the floodlight to the right. Removing The Mount 1. To remove the mount, remove the floodlight from the mount. 2. Slowly twist and pull the mount at the same time. - Page 7 Scan the QR code below or email us at contact@wasserstein-home.com Blink Floodlight Mount and Camera are not included. Wasserstein is a trademark of Dropcases Ltd. Wasserstein is not affiliated with Immedia Semiconductor, LLC Blink is the trademark of Immedia www.wasserstein-home.com...