Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Wasserstein Alarm Clock Camera Case
Summary of Contents for Wasserstein Alarm Clock Camera Case
- Page 1 Alarm Clock Camera Case Compatible with Wyze Cam V3 User Manual...
-
Page 2: Safety And Warning
In the Box 1 x alarm clock 1 x power cable 1 x power adapter camera case Safety & Warning • Read and follow the instructions carefully. • Hidden cameras are prohibited in some countries and regions. Follow any local legislation and policies for installing the camera. •... - Page 3 Introduction to Parts 1. Clock display 7. Camera pushers 2. Settings buttons 8. Power cable 3. Built-in infrared light 9. USB-C power socket 4. Light sensor 10. Infrared light switch 5. Back cover 11. Power adapter 6. Camera compartment 12. Power cable Page 2...
-
Page 4: Clock Setup
Clock Setup 1. Use the power adapter and cable provided to plug the clock into an outlet. 2. All LEDs will turn on and display “0:00” indicating that the clock is ready to be set up. 3. To set the time, press and hold the “CLOCK” button until the display is flashing, use “+/-”... -
Page 5: Camera Setup
Camera Setup Note: Setup and pairing are easier before putting the camera into the clock. 1. Remove the back cover and connect the power cable inside the compartment to the Wyze Cam V3. AUTO 2. Follow the camera user guide to pair and set up the camera and connect to the Wi-Fi network. - Page 6 4. Go to the camera settings from the Wyze app (tap the gear icon at the top right). Then go the the "Advance Settings" page and change the following settings: • Night vision mode: Auto • Night vision IR light: Off •...
- Page 7 5. Insert the camera into the clock, then flip the infrared light switch inside the compartment to “Auto”. AUTO 6. Check the image from the app in daylight, as well as in a dark room. If it looks good, lock the camera firmly with the pushers at the top and bottom, and close the back cover.
-
Page 8: Alarm Setup
Alarm Setup 1. To set the alarm, press and hold the “ALARM” button until the display starts flashing. Use the “+/-” button to adjust the digit and set the snooze feature. Press the “ALARM” button again to confirm the setting. 2. -
Page 9: Troubleshooting
Snooze To delay the alarm clock, press the “LIGHT | SNOOZE” button when the alarm is ringing. The snooze timer can be set after setting the alarm clock (default: 05 = 5 minutes). Troubleshooting Problems Possible solution The clock is not working. Check the power supply to the clock, make sure the cable and adapter are connected properly. - Page 10 * The actual product and specifications are subject to change without notice due to product enhancement. Get More Support Scan the QR code below or email us at contact@wasserstein-home.com. Alarm Setup Wyze V3 not included. Wyze V3 is a trademark of Wyze Labs, Inc.