Table of Contents
Advertisement
EN
- The tension spring for the lifting arm has unhooked or broken. Rehook the spring or replace the broken spring by an equivalent new
- The vehicle jack presumably needs lubricating. All moving parts must be cleaned and lubricated or greased, (see "Instructions for
use"). IMPORTANT: The rods of the pumping and lifting cylinder should never be lubricated or greased.
- Too much oil in the hydraulic system. Screw out the drain valve and drain out the excess oil - see also the "Topping up the hydraulic
oil" and "Purging" sections.
Technical Data
Description
Model
Nominal Load
Lifting height
Total length
Οwn weight
Lifting height with rated load (mm):
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of
the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not
be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out
by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the
importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
3
Hydraulic trolley jack
BWR5216
max. 2 tonnes
min. 135 mm to max. 340 mm
ca. 447 mm
ca. 8.7 kg
135-340
WWW.NIKOLAOUTOOLS.GR
Advertisement
Table of Contents
