Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Wasserstein Wi-Fi Solar Light
Summary of Contents for Wasserstein Wi-Fi Solar Light
- Page 1 Wi-Fi Solar Light User Manual...
-
Page 2: Table Of Contents
Table of Contents Package Includes Safety Information Features LED Indicator Satatus Mounting the Wi-Fi Solar Light App Pairing Parameter Settings Motion Detection Indicator Battery Level Light Button Brightness Setting Motion Sensor Threshold Light On Duration History Time Test Alexa & Google Assistant Integration... -
Page 3: Package Includes
• Disassembling the Wi-Fi Solar Light is not recommended as it may cause damage to internal components. The Wi-Fi Solar Light may not function properly after disassembly. • Make sure the Wi-Fi Solar Light is properly installed onto the wall mount with screws to prevent damage by animals, rain and wind. -
Page 4: Led Indicator Satatus
3. After securely installing the wall mount, slide the Wi-Fi Solar Light onto the mount downwards. 4. Secure the Wi-Fi Solar Light to the wall mount by inserting the screw in the hole located at the bottom-center of the wall mount. - Page 5 1. Press “Add Device” or “+” on the upper right corner. 2. Press “Add Manually” - “Lighting (Wi-Fi)”, or simply press “Auto Scan”. 3. Remove the Wi-Fi Solar Light from the wall mount. Press and hold the “sync button” located at the bottom-rear side of the device, beside the ON/OFF switch, for five seconds until the red indicator light starts blinking rapidly.
-
Page 6: Parameter Settings
Parameter Settings Wi-fi Solar Light 1. Motion Detection Indicator • The “Motion Detection” indicator shows the current status of your Wi-Fi Solar Light’s PIR Sensor. • It will be automatically “Disabled” during daytime and “Enabled” during nighttime. Disabled Motion Sensor is OFF... -
Page 7: Brightness Setting
You can use this list to monitor the nighttime movements around your home. 8. Time • You can create custom schedules for your Wi-Fi Solar Light by setting the time, day and PIR sensor state accordingly. • Use this when you want to turn the motion sensor on or off at certain times. -
Page 8: Alexa & Google Assistant Integration
Alexa & Google Assistant Integration 1. Make sure you have paired the Wi-Fi Solar Light to the “Wstein” app. 2. Rename the Wi-Fi Solar Light as you desire. This will be the name used with your Amazon Alexa or Google Home commands. -
Page 9: Groupings
1. Position the Wi-Fi Solar Light so that the motion sensor is pointing towards the general area you want to monitor. 2. Mount the Wi-Fi Solar Light at least 7 ft (2 m) above the ground and aim it slightly downward (at least 15° downward) for the most effective results. -
Page 10: Important Tips
3. You can also mount the Wi-Fi Solar Light beside your security cameras to illuminate the camera’s vision at night. 4. Although the Wi-Fi Solar Light is weatherproof, it is advisable to mount it to a wall shaded from the rain and sunlight to maximize battery life. -
Page 11: Specifications
Press “Confirm” and go to your Wi-Fi setting. Connect to “SmartLife-XXXX”. h. Wait for the Wi-Fi Solar Light to connect to your mobile app. After successful pairing, you can rename the device accordingly. Press “Done” to complete the setup process.
Need help?
Do you have a question about the Wi-Fi Solar Light and is the answer not in the manual?
Questions and answers