Table of Contents
Advertisement
Methods of use
1.
When lifting at two points, the lifting angle
must be within 60°
2.
Always lift from three points when using the
clamps on complex shaped objects.
3.
Clamps can also be used for positioning
steel structure for welding, pulling and/or
suspending.
Note - When clamps are used continuously
over long periods of time, check the
clamping force regularly and do not
overload the clamp.
Insert the load completely until it comes into contact
with the deepest part of the jaw opening
Instruction Guide Tiger CSS En 202201 v2.0
www.tigerlifting.com
Page 4 of 14
Advertisement
Table of Contents
