Advertisement
Quick Links
Advertisement
Summary of Contents for Wasserstein Smart Water Leak Detector
- Page 1 Smart Water Leak Detector USER MANUAL...
- Page 2 In the Box 1 x water sensor 1 x probe cable 1 x holder 1 x 3 volt battery 2 x screws 2 x wall anchors (in water sensor) Parts Holder Probe cable port Alarm Probe indicator Page 1...
- Page 3 Setup 1. Peel off the cover from the back of the holder to reveal the adhesive tape and screw hole. Place one screw through the front and mount it accordingly. 2. Click the water sensor onto the holder. Line up the probe cable port with the indented flange on the bottom of the water sensor.
- Page 4 3. Plug the probe cable into the cable port. 4. Test the water sensor by placing the probe in a small puddle of water. If the water sensor has been installed correctly, it will beep when it touches water. Page 3...
-
Page 5: App Setup
• Upload speed of at least 2 Mbps. 1. Download the App by scanning the QR code or by searching "Wasserstein App" in Google Play Store or the App Store. 2. Sign up for a new account or Login to an existing account. - Page 6 To use Auto Scan, please enable Bluetooth on your mobile device. Page 5...
- Page 7 Use the App to control the settings of your Smart Water Sensor, including the alarm and low battery mode, as well as view your device record. Page 6...
-
Page 8: Resetting The Device
Resetting the Device 1. Open up the water sensor and remove the battery. 2. Put the battery back in. Press and hold the button until the light starts blinking. Page 7... -
Page 9: Specifications
2.6 x 2.6 x 0.9 in 2.7 x 2.7 x 1.3 in (with holder) Supported Wi-Fi Standard: IEEE 802.11b/11bgn mixed/11bg mixed Get More Support Scan the QR code below or email us at contact@wasserstein-home.com. www.wasserstein-home.com Wasserstein is a trademark of Dropcases Ltd. Made in China...