Electrolux EW7W3164LS User Manual page 29

11.1 Complete wash&dry
programme
Automatic Non-Stop
progremme or programmes
Depending on the model, the appliance
may be equipped with one or more
OneGo programmes, automatic
wash&dry programmes where it is not
necessary to set the Dry.
Proceed as follows:
1. After loading laundry and detergent,
press the On/Off button for some
seconds to activate the appliance.
2. Set the OneGo programme by
means of the programme dial.
3. Touch the Start/Pause
start the programme.
Non-automatic wash&dry
programmes
In some washing programmes, you can
combine Wash and Dry for running a
complete wash&dry programme.
Proceed as follows:
1. Press the On/Off button for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The appliance
defaults to the washing only mode
and the indicator of the Wash button
is on. The display shows the default
temperature and spin. If necessary,
change them according to your
laundry. The display also shows the
maximum recommended load for
washing phase.
5. Set the desired options, if there are
available.
6. Tap on the Dry button to activate also
the drying function. Both indicators of
the Wash and Dry buttons are on.
The indicators
the display. The display also shows
the maximum recommended load for
button to
and appear on
a washing and drying programme
(e.g. 6 kg for cottons).
11.2 Washing and Drying -
Automatic levels
1. Tap on the Auto Dry button
repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:
a. Iron dry: for cotton items;
b. Cupboard dry: for cotton and
synthetic items;
c. Extra dry: for cotton items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause
the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
11.3 Washing and Timed
Drying
1. Tap on the Time Dry button
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator
the indicator
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pause
start the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
ENGLISH
to start
goes off and
comes on.
button to
29