1. Manuals
  2. Brands
  3. Arwin Tools Manuals
  4. Snow Blower
  5. 20300
  6. Quick start manual

Arwin Tools 20300 Quick Start Manual

18v snow thrower
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
18V Snow Thrower
20300

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Arwin Tools 20300

  • Page 1 18V Snow Thrower 20300...
  • Page 2 Safety Instructions Warning: Read the operating instructions and act accordingly. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Keep it for general use. Comply with the safety information and the warning on the appliance. SAVE THESE INSTRUCTIONS This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person...
  • Page 3 − Never operate the snow thrower without good visibility or light. − Take all possible precautions when leaving the machine unattended. Stop the appliance, disconnect from the supply mains. 4 .Maintenance and storage − Check the supply cord, plug and all guards; at frequent intervals for proper tightness to be sure the equipment is in safe working condition.
  • Page 4 • Use caution when cleaning or performing maintenance on the appliance. DANGER! Watch your fingers! Wear gloves! • It is forbidden to move or modify any of the electrical and mechanical safety devices. • The snow can sometimes hide objects that might clog the chute, or otherwise cause damage. Clear the area of doormats, sleds, boards, wires and other debris.
  • Page 5 The manufacturer is not liable for any damage or injury resulting from such action. II.Description Fig.1 Item Description Safety button Trigger Handle bar Battery Knob Front handle bar Upper tube Lower tube Motor housing Side cover Plate Auger III.Assembly Guide bar (Fig. 2) Take off the plastic clamp.

  • Page 6: Front Handle

    Fig.2 Front handle Loosen the knob and lift up the handle bar to the operation position. (Fig. 4) Adjust the height of the handle to a safe and comfortable position and fix it by the knob. Fig.4 . Using your Snow Thrower 1.

  • Page 7: Removing Snow

    Fig.6 3. REMOVING SNOW • Before starting work, make sure that the area to be clear is free of stones, debris, wires and any other objects. • Make sure all fasteners (screws, nuts, etc.) are always fully tightened so that you can work safely with the appliance.

  • Page 8: Explanation Of Symbols

    from the extension cable. • Regular cleaning and maintenance of your appliance will ensure efficiency and prolong the life of your appliance. • After each operation, take apart and clean out the ice and debris from the ventilator and its slot, auger and housings.

  • Page 9: Tecnical Data

    To reduce the risk of electric shock, disconnect from supply mains and replace damaged cord immediately. Do not use hands to unclog chute. Wear safety goggles and ear protectors Double insulated for additional protection. Conforms to relevant safety standards. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Table of Contents