Table of Contents
Advertisement
1 The power buttons labelled ON and OFF will toggle the M5 from standby to the on-position, only if
the POWER rocker switch on the left rear of the M5 is in the ON position.
2 The SETUP button for editing the M5's output settings.
3 There are ten transport control buttons that allows one to directly control the CD/SACD media. These
buttons handle the basic operations of; Open/Close
forward and back
, Play
4 The navigation buttons
OSD, title and menu screens.
5 Direct multi-channel and 2-channel selection of Hybrid SACD selection. Select 2-channel or multi-
channel audio output from the audio analog jacks.
6 For Hybrid SACD media, select CD stereo 2-channel or SACD multi-channel audio.
7 For SACD multi-channel media. Press CH LEVEL and then using the navigation buttons fine adjust
the level of the selected channel. Press the left/right navigation buttons to select the desired channel.
Press the CH LEVEL to exit the adjustments.
8 For SACD multi-channel media. Press TEXT to display the recorded documentation of the artist and
the music title being played. This information will be scrolled across the VFD.
9 In Stop mode, use the PROGRAM button to select the order in which the media will be played. You
may program a maximum of 20 songs.
10 In Stop mode, use the CLEAR button to edit the programmed selection.
11 Select REPEAT to repeat a single track or repeat the entire disc. To clear the REPEAT function toggle
the REPEAT button until the REPEAT icon is cleared from the VFD.
12 Select REPEAT A-B if you want to repeat only a section of a song being played. Press once for the
start point and a second time for the end point. Press a third time to clear the REPEAT A-B function.
13 Select the RANDOM function to randomly play various tracks on the CD or SACD player. Press once
to engage the RANDOM function, a second time to clear the RANDOM function.
14 The number buttons are used for inputting numeric values when directly selecting media tracks.
15 Select the DIMMER function for dimming the M5's VFD. There are three levels; low, medium, and
high brightness. The default is high brightness.
16 In Play mode, use the TIME button to display either; total time remaining or total time elapsed on the
entire disc, as well as time remaining or elapsed per track on the VFD.
17 The VIDEO ON/OFF button is used to switch on and off the video output signal.
18 The CD FILTER button is used for selecting the bandwidth of the audio low pass filter for the CD
media being played. The options are NORMAL Bandwidth and SLOW Bandwidth.
recordings the SLOW Bandwidth may provide a wide frequency range and spatial feeling. Toggle
between these two settings when the media is in STOP mode. This feature is not available for SACD
media.
19 The MENU button automatically stops play of any media and returns the M5 to the primary menu of
the media being played. For MP3 and WMA recordings the menu will become the recorded root
directory. For Hybrid SACDs, the menu becomes the CD/SACD selection directory.
of the media tray, Stop
, Scan tracks
, and Index tracks
/
in conjunction with the ENTER button allows one to navigate the
Identification of Controls
OPERATION WITH THE REMOTE CONTROL
, Pause
, Skip
.
/
For some
9
Advertisement
Table of Contents
