J5 create JVCU360 - 360 All Around Webcam Manual

Function Description

Six Display Modes

	Display Modes	Vertical 90° Rotation	Touch Bar Support
Full Screen 360°			N/A
360° All Around View			N/A
Host Mode
Dual Host Mode
Single View 90°			N/A
Wide Angle View 120°			N/A

Webcam Companion App

JVU Series Companion

Webcam Companion App for Windows

Webcam Companion App for macOS

Press the "Mode" button to select one of six different camera modes.

1. Full screen mode
2. 360° all around view mode
3. Host mode: use the touch bar to specify the participant's location
4. Dual host mode: use the touch bar to specify the two participants' locations
5. Single view mode 90°: select single mode and turn the camera to the vertical position
6. Wide angle view 120°

LED Indicator

Blue light: camera in use

Purple light: the JVCU360 is connected to the computer and powered on

Red light: microphone muted

Touch Bar

1. Swipe or touch this area with your fingertips
2. Adjust the position and angle of the host using the red and green lines for guidance.
3. Suitable for host mode and dual host mode

Start a video call with your JVCU360

Ensure your PC, Mac®, or Chromebook™ has Internet service, and that both you and the person you need to call are using a video calling application. Select the correct video device and microphone in the settings menu in the video calling application.

1. The JVCU360 provides full HD 1080P video calling, with a minimum of 2 megabits upload speed.
2. 1080p calling may be affected by available network bandwidth, CPU speed, type of video calling application, etc.
3. Wide compatibility: Zoom™, Facebook™ Messenger, Skype™, Microsoft Teams™, etc.

For Windows® 10

1. Go to Start > Settings > Privacy > Camera/Microphone
2. Choose your preferred settings to allow apps to access your camera and microphone.
3. Turn on your camera and microphone from within the settings of your video calling application.

Privacy settings for macOS®

1. On your Mac® choose the Apple® menu > System Preferences, click Security & Privacy, then click Privacy.
2. Select Camera/Microphone.
3. Select the checkbox next to an app to allow it to access the camera and microphone. Deselect the checkbox to turn off access for that app. If you turn off access for an app, you will be asked to turn it on again the next time that app tries to use your camera or microphone.

Special Notes

STOP!
If you have any problems with this product, please contact our technical support team for assistance.

TECHNICAL SUPPORT

Customer Service: 888-988-0488

Technical Support: 888-689-4088

Email: service@j5create.com

REGULATORY COMPLIANCE

FCC
This equipment has been tested and found to comply with FCC Part 15, Subpart B, ANSI C63.4-2014, ICES-003 Issue 6, January 2016 (Updated April 2019).

Operation is subject to the following two conditions:

• This device may not cause harmful interference
• This device must accept any interference, including interference that may cause undesired operation of the device.

CE
This equipment is in compliance with the requirements of the following regulations: EN 55032:2015+AC:2016 Class B, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55035:2017

RCM
Standard(s): AS/NZS CISPR 32:2015 Class B

VCCI
This equipment is in compliance with the requirements of the following regulations:
CISPR 32 © IEC: 2016 Class B

Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the expressed written permission of the manufacturer.

LIMITED WARRANTY

j5create offers a limited 1-year warranty.

For more information please visit our website at http://www.j5create.com

Copyright© 2021 j5create. All rights reserved. All trade names are registered trademarks of their respective owners. Features and specifications are subject to change without notice. Product may not be exactly as shown in the diagrams.

Windows, Skype and Microsoft Teams are trademarks of Microsoft Corp., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. macOS, Mac and Apple are trademarks of Apple Inc., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. USB and USB-C are trademarks of USB Implementers Forum, Inc., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. Zoom is a trademark of Zoom Video Communications, Inc., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. Chromebook and Chrome OS are trademarks of Google LLC, its affiliates or its respective owners, registered or used in many jurisdictions worldwide. Facebook is a trademark of Facebook, its affiliates or its respective owners, registered or used in many jurisdictions worldwide. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and/or names or their products and are the property of their respective owners. All company, product and service names used are for identification purposes only. Use of these names, logos, and brands does not imply endorsement. We disclaim any interest in the marks of others.