Dahua DHI-ASR2101A User Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Card Reader
  5. DHI-ASR2101A
  6. User manual
Dahua DHI-ASR2101A User Manual

Dahua DHI-ASR2101A User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Card Reader
User's Manual
V1.0.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DHI-ASR2101A and is the answer not in the manual?

Questions and answers

Related Manuals for Dahua DHI-ASR2101A

Summary of Contents for Dahua DHI-ASR2101A

  • Page 1 Card Reader User's Manual V1.0.2...

  • Page 2: Foreword

    Foreword General This manual introduces the functions and operations of the Card Reader. Read carefully before using the device, and keep the manual safe for future reference. Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury.
  • Page 3 might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. ● There might be errors in the print or deviations in the description of the functions, operations and technical data.

  • Page 4: Important Safeguards And Warnings

    Important Safeguards and Warnings This section introduces content covering the proper handling of the Card Reader, hazard prevention, and prevention of property damage. Read carefully before using the Card Reader, and comply with the guidelines when using it. Transportation Requirement Transport, use and store the Card Reader under allowed humidity and temperature conditions.
  • Page 5 ● Do not drop or splash liquid onto the Card Reader, and make sure that there is no object filled with liquid on the Card Reader to prevent liquid from flowing into it. ● Do not disassemble the Card Reader without professional instruction.

  • Page 6: Table Of Contents

    Table of Contents Foreword ........................................I Important Safeguards and Warnings ............................III 1 Introduction ......................................1 1.1 Features ......................................1 1.2 Device Appearance ................................... 1 1.2.1 86 Box Model ..................................2 1.2.2 Slim Model ..................................2 1.2.3 Fingerprint Model ................................3 2 Ports Overview .......................................

  • Page 7: Introduction

    1 Introduction 1.1 Features ● PC material and acrylic panel with a slim and waterproof design. ● Supports non-contact card reading. ● Supports IC card (Mifare) reading, ID card reading (only for the Device with ID card reading function), identity card reading (only for the Device with IC and CPU card reading function); QR code reading (only for the Device with QR code reading function);...

  • Page 8: Box Model

    1.2.1 86 Box Model Figure 1-1 Dimensions of the 86 box model (mm [inch]) The 86 box model can be further divided into Bluetooth card reader, QR code card reader, and general card reader according to their functions. 1.2.2 Slim Model Figure 1-2 Dimensions of the slim model (mm [inch])

  • Page 9: Fingerprint Model

    Slim model can be further divided into Bluetooth card reader and general card reader according to their functions. 1.2.3 Fingerprint Model Figure 1-3 Dimensions of the fingerprint model (mm [inch])

  • Page 10: Ports Overview

    2 Ports Overview Use RS–485 or Wiegand to connect the Device. Fingerprint model and QR code model only support RS–485. 8-core Cables for the 86 Box and Slim Models Table 2-1 Cable connection description (1) Color Port Description PWR (12 VDC) Black RD–...

  • Page 11: Installation

    3 Installation 3.1 Installing the 86 Box Model Box mount 1. Mount the 86 box to the wall. 2. Wire the card reader, and put the wires inside the 86 box. 3. Use two M4 screws to attach the bracket to the 86 box. 4.

  • Page 12: Installing The Slim Model

    Figure 3-2 Wall mount 3.2 Installing the Slim Model Procedure Step 1 Drill 4 holes and one cable outlet on the wall. For surface-mounted wiring, cable outlet is not required. Step 2 Put 3 expansion bolts into the holes. Step 3 Wires of the Device, and pass the wires through the slot of the bracket.

  • Page 13: Installing The Fingerprint Model

    Figure 3-3 In-wall wiring Figure 3-4 Surface mounted wiring 3.3 Installing the Fingerprint Model Procedure Step 1 Drill 4 holes and one cable outlet on the wall.
  • Page 14 For surface-mounted wiring, cable outlet is not required. Step 2 Put 3 expansion bolts into the holes. Step 3 Use three M3 screws to mount the bracket to the wall. Step 4 Wiring the Device. Step 5 Attach the device to the bracket from top down. Figure 3-5 In-wall wiring...
  • Page 15 Figure 3-6 Surface-mounted wiring Step 6 Press the Device toward until you hear a "click" sound, and the installation completes. Figure 3-7 Secure the card reader Related Operations To remove the card reader from the wall, use the screwdriver pry the card reader open from the bottom until you hear a "click"...
  • Page 16 Figure 3-8 Remove the card reader...

  • Page 17: Configuring Bluetooth Card Reader

    4 Configuring Bluetooth Card Reader The Bluetooth card reader is used together with the Easy4Key app to open the door remotely. Prerequisites ● The latest version of the SmartPSS Lite is installed on the computer. ● Card swiping permissions have been successfully assigned to users. For details, see the user manual of the SmartPSS Lite.
  • Page 18 After the card is successfully added, the user can open the door through Easy4Key on the phone. The distance between the phone and the card reader must be less than 10 m. Figure 4-3 Easy4Key...

  • Page 19: Sound And Light Prompt

    5 Sound and Light Prompt 5.1 86 Box and Slim Models Table 5-1 Sound and light prompt description Situation Sound and Light Prompt Buzz once. Power on. The indicator is solid blue. Removing the Device. Long buzz for 15 seconds. Pressing buttons.
  • Page 20 Situation Sound and Light Prompt Buzz three times. Abnormal 485 communication and swiping an The indicator flashes red once, and then turns authorized or unauthorized card/ fingerprint. to solid blue as standby mode. 485 communication and a fingerprint is Buzz once. recognized.

  • Page 21: Unlocking The Door

    6 Unlocking the Door Swipe card on the card reader to open the door. For card reader with keypad, you can also unlock the door by entering the user ID and password. ● Unlock the door through public password: Enter the public password, and then tap #. ●...

  • Page 22: Updating The System

    7 Updating the System 7.1 Updating through SmartPSS Lite Prerequisites ● The Card Reader was added to the access controller through RS-485 wires. ● The access controller and Card Reader are powered on. Procedure Step 1 Install and log in to SmartPSS Lite, and then select Device Manager. Step 2 Click Figure 7-1 Select the access controller...

  • Page 23: Appendix 1 Cybersecurity Recommendations

    Appendix 1 Cybersecurity Recommendations Mandatory actions to be taken for basic equipment network security: 1. Use Strong Passwords Please refer to the following suggestions to set passwords: ● The length should not be less than 8 characters. ● Include at least two types of characters; character types include upper and lower case letters, numbers and symbols.
  • Page 24 minimum set of permissions to them. 9. Disable Unnecessary Services and Choose Secure Modes If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP, etc., to reduce risks. If necessary, it is highly recommended that you use safe modes, including but not limited to the following services: ●...

Table of Contents