Table of Contents
Advertisement
Quick Links
ELSETA
IOMOD HT
User manual
Elseta
12/17/2015
V0.6
COPYRIGHTS AND TRADEMARKS
Elseta are UAB Aedilis trademark that identifies of UAB Aedilis manufactured. All of the product and
the user manual of the right to ownership of the copyright belongs to "Aedilis. These documents and
the product properties can not be changed without company Aedilis' knowledge and written consent.
User manual may not be modified without company Aedilis' notice.
DECLARATION OF CONFORMITY
(in accordance with ISO / IEC Guide 22 and EN Section 45014)
Manufacturer: UAB Aedilis
Address of the manufacturer L. Zamenhofo st. 5 LT Vilnius, Lithuania
We claim that:
The device IOMOD HT
Conforms to the following standards:
EMC:
Radiation EN 55022 (Class A)
1 emitted radiation (30-1000MHz)
Second radiation conductors (0.15-30MHz)
EN 50082-1 immunity test
1 IEC 801-3: Radio-frequency electromagnetic field
2 IEC 801-2: Electrostatic discharge.
3 IEC 801-4: Quick periodic electrostatic discharges
Additional information:
"The device complies with the Low Voltage Directive 73/23 / EEC and EMC Directive 89/336 / EEC.
Device assembly complies with the RoHS ROHS Directive.
Manufacturer contact:
Equipment quality controller
UAB Aedilis
Address: L. Zamenhofo g. 5, LT 06332, Vilnius, Lithuania
Phone: +370 5 2742707
E-mail. Email: support@elseta.com
IOMOD HT
12/17/2015
V0.6 | ELSETA |
2
Advertisement
Table of Contents
Related Manuals for Elseta IOMOD HT
Summary of Contents for Elseta IOMOD HT
- Page 1 12/17/2015 COPYRIGHTS AND TRADEMARKS Elseta are UAB Aedilis trademark that identifies of UAB Aedilis manufactured. All of the product and the user manual of the right to ownership of the copyright belongs to "Aedilis. These documents and the product properties can not be changed without company Aedilis' knowledge and written consent.
-
Page 2: Table Of Contents
Configuration over USB ........................ 1 Driver installation ........................8 Information Notice - the information that is useful advice or special places. IOMOD HT configuration with PuTTY terminal ................9 Main Menu ..........................10 Firmware upgrade over USB ....................11 Warning of the danger. The work may be performed only by a qualified professional. -
Page 3: Features
01 (0x01) Read Coils Status Device is also capable of switching relays automatically (thermostat function) as configured. Reads status of relays (Off or On). IOMOD HT has 2 relays on addresses 6 and 7 (Only for IOMOD 2. Features HT Advanced). -
Page 4: Techninical Information
Max. switching power 1,250 VA, 150 W 6. Device Connection IOMOD HT has integrated termination resistor which can be switched on or off over USB configuration. Recommended to switch on termination resistor on last device on RS485 line: Select “x86” driver for 32bit machine, or x64 for 64bit machine. If not sure, select root folder (folder in which x64 and x86 lays inside). -
Page 5: Iomod Ht Configuration With Putty Terminal
Settings Settings cancel) Firmware Mass Storage (1 to confirm, 0 to Upgrade Device Firmware cancel) Upgrade Exit Exit and disconnect V0.6 | ELSETA | IOMOD HT configuration with PuTTY terminal V0.6 | ELSETA | IOMOD HT configuration with PuTTY terminal... -
Page 6: Firmware Upgrade Over Usb
To update device firmware user must enter main configuration menu. Enter Firmware update screen by pressing [4]; To test IOMOD HT with default settings, user connects device through RS485 to Modbus master. Confirm update by pressing [1]; Example will show “The Vinci Expert” as serial interface converter and adapter to PC with “The Device now enters Firmware Upgrade mode. - Page 7 Tel.: +370 5 2742707, +370 5 2032302 Fax: +370 5 2058584 Email: support@elseta.com In the web: www.aedilis.lt Work hours: I-V 8:00-17:00 9. Document history Version Date Author Description v0.1 2015.12.15 First version v.0.2 V0.6 | ELSETA | Information of the equipment manufacturer...
Need help?
Do you have a question about the IOMOD HT and is the answer not in the manual?
Questions and answers