Phone Booth Assembly Manual
Safety information
•
This manual is part of the device. It must be kept intact and within easy reach
throughout the life of the appliance.
•
It is necessary to carefully read this manual and all its indications before
assembling the device.
•
This recommendations applies also to the appliance and component manuals.
•
Do not perform any other task than the given in this user manual.
•
Before getting started, make sure all parts are included, please don't forget
review and count each part.
•
Prepare all to necessary tools and parts.
•
Don't force all fittings.
•
The assembly of the Phone Booth must be performed by qualified personnel,
following the rules and regulations of the destination country.
•
Do not perform any modification on the device.
•
Two people may be needed to hold parts in place while tightening and
assembling.
•
The installation requires an electrical connection. The client must provide these
services.
•
The appliance has been manufactured for the following function: the booth
is a private area with light components to assembly; any other use should be
considered improper.
•
The manufacturer declines all responsibility for uses other than those indicated.
•
This appliance meets the requirements established by the EEC directives
currently in force.
•
The desk surfaces and door must be operated gently to avoid injuries.
•
The worktop surfaces may produce shear injuries.
•
Pay special attention when children near the Phone Booth.
•
Don't supplu electric energy until finish all connection.
•
This device complies with the european directive 2002/96/CE regarding electric
and electronic equipment (Waste Electrical and Electronic Equipment - WEEE).
This directive defines the rules to the collection and recycling of the devices'
waste valid throughout the European Union.
•
The illustrations given in this manual are merely informative and have no
contractual validity.
III
Oct 2022 / Revision 0