Page 1
ルブリケーター Air-driven Motor Pail Pump For pail and rectangular cans INSTRUCTION MANUAL ■AMP-10 もくじ Safety precautions ・・・・・・・・ 2~4 ・・・・・・・・ Before using the device ・・・・・・・・ Parts description 6~7 ・・・・・・・・Installation ・・・・・・・・Usage instruction 9 ~10 ・・・・・・・・Troubleshooting ・・・・・・・・ Warranty and service...
SAFETY PRECAUTIONS ・ This manual contains safety-related information. Please follow it strictly. Before using the device, carefully read the instructions (misusing the device may result in accidents). Keep the manual in a safe place and refer to it when necessary. ・...
BEFORE USING THE DEVICE ★ Read and strictly follow instructions on liquid’s use. Refer to information on liquid you wish to transfer. Read it carefully and use the liquid properly. ★ In case of direct contact with liquid, act immediately. In case of liquid ingestion, skin contamination etc., immediately proceed with liquid’s safety procedures and seek medical attention.
Page 4
★ Use the device in a safe place. Keep the pump away from children. ★ Seek medical attention when necessary. If you suddenly feel worse when operating the pump, immediately discontinue the operation and seek medical attention. ★ Use protective equipment. Wear protective equipment according to liquid’s safety instructions.
Page 5
★ Request technical service whenever required. When the device stops operating or operates in a strange manner, immediately turn it off and contact technical service. Do not use broken equipment, as it may result in accidents. ★ Do not cause shock to device’s main body. It may result in pump’s malfunction, breakdowns and leakage.
PARTS DESCRIPTION ① Regulation valve ④ Air Injection Coupler ② Delivery/suction hose (L: 50cm ・ ⑤ Delivery/suction switch (ON/OFF) Diameter: 9mm) ③ Pump’s main body ⑥ Adapter ※ The hose is attached using a one-touch coupler.
INSTALLATION ※ When transferring dangerous liquids like gasoline, remember to use a ground wire for protection against static electricity. Not using it may result in fire. 1. Fix the adapter to can’s outlet. Press it until you hear a ‘click’ sound. 2.
Page 8
3. Fix the device firmly with a fixing screw.
USAGE INSTRUCTION 1. When the installation has been completed, connect the air hose to the air supply coupler. 2. Set the switch to “delivery” to begin delivery, or to “suction” to begin collection of the liquid.
TROUBLESHOOTING If the pump does not operate properly (or does not operate at all), please read the following troubleshooting section. ※ Remember to disconnect the air hose before the disassembly. Turn the switch left and right to their maximum position. If step 1 does not solve the problem: 〈disassembling the pump〉...
Page 11
4. If the pump side is not operational, it is possible that the device might have become rusted or the dirt from the tank has clogged the system. Please proceed as follows: 1. Release the screw from the M2 hexagon socket.
WARRANTY AND SERVICE Thank you for purchasing our product! We look forward to provide you with help, advice and service, however, please remember that the warranty does not cover all possible cases, in which such service may be required. ① If the product has been used correctly, yet broke down, it will be repaired for free if the breakdown has been reported within 12 months from the date of purchase.
Need help?
Do you have a question about the AMP-10 and is the answer not in the manual?
Questions and answers