Summary of Contents for Racing RACFS1
- Page 1 ORIGINAL INSTRUCTIONS=>EN AUTO-DARKENING WELDING HELMET RACFS1 USER'S MANUAL CAUTION: Read the instructions before using this unit!
-
Page 2: Intended Use
1. INTENDED USE 1) Auto-Darkening Welding Helmets are designed to protect the eye and face from sparks, spatter, and harmful radiation under normal welding conditions auto-darkening filter automatically changes from a light state to a dark state when an arc is struck. And it returns to the light state when welding stops. -
Page 3: Part Description
4. PART DESCRIPTION 1) body helmets 5) shade settings 9) pressure plate 2) head fixation 6) cover plate 10) UV/IR filter 3) fixation/clamping settings 7) solar panel 4) angle settings 8) fixed plate 5. TECHNLCAL SPECIFICATIONS · Viewing Area: 100 x 49 mm ·... - Page 4 SHADE GUIDE TABLE (No.1) 6. OPERATING INSTRUCTIONS 1) Set the size headband The tightness of the headband is adjustable compression of the clamping wheels. Rotate You can set the desired level of comfort. This crimping wheel is located at the rear of the helmet. 2) Set the top of the headband masks Performed vertical adjustment of the upper tape head strap and the securing pin into the hole and thus the desired position.
- Page 5 aperture 9 at the 13th Control rotary screw aperture is positioned on the surface of the helmet shell. 7) Grinding function Grinding mode is intended for cutting and not for welding. 8) Sensitivity control The light sensor can be adjusted by turning the adjusting screw/knob to adjust the sensitivity right or left.
-
Page 6: Cleaning And Storage
7. CLEANING AND STORAGE 1) Cleaning Helmet clean by wiping with a soft cloth. Regularly clean the surface of the cartridge. Do not use aggressive cleaning solutions. Sensors and solar cells clean with a solution of soapy water and a clean cloth, dry the surface with a clean cloth. -
Page 7: Ec Declaration Of Conformity
32, rue Aristide Bergès - ZI 31270 Cugnaux – France declares that the new PPE described hereafter FACTORY MODEL:STS2 CUSTOMER REF. RACFS1. S/N: 20220904946-20220907353 is in conformity with the relevant Union harmonization legislation Regulation (EU 2016/425 of the European parliament and of the council,... -
Page 8: Warranty
11. WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 9: Product Failure
12. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. •... -
Page 10: Warranty Exclusions
13. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 11 Imported by BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Made in PRC 2022...