Page 1
DIGITAL PHASE SHIFTER www.myungyuon.com ■ Purpose to correct use, please read the user manual MY-PS-3 carefully before using the DPS. MY-PS-5 Please ensure the user manual to be handed over to ■ MY-PS-7.5 the end-user and the person in charge of maintenance.
Page 2
Be Sure To Read And Fully Understand The Followings Before Use. CAUTION This product should be used only for 3 phase 220V motor. ■ One DPS unit should be used only for one motor that meets DPS specifications. ■ 3 phase voltages are output when the motor is running. ■...
100×182×125 ※ Product specifications are subject to change without prior notice purpose to improve the quality. If you use a DPS that is one step above your motor capacity, you can get 90 to 95% efficiency. (65 to 70% efficiency when using DPS with the same capacity)
Page 4
Check the capacity of the DPS and motor. and running the motor, but the If the DPS capacity is too large for the motor capacity, that happens. voltages and current value are Or, please check whether two motors are installed in the machine.
Page 5
For reverse when the rotation, motor is swap two 220V 출 력 lines of three running. output lines. Input 220V motor (3 phase) Never use DPS capacity 2 levels higher than rated motor capacity. It may cause overheating or trouble.
Example of a connection between a DPS and a magnetic contactor Case of Correct Connection between a magnetic contactor and a DPS (3phase 220V) Circuit Breaker U V W Please check if the connection location is the same according to the color of the control wires.
Page 7
If you don’t know how to connect the control wires ■ to a magnetic contactor, you can swap the wires of DPS’s output referring to the picture below, and then your motor will be working well. U V W U V W...
Need help?
Do you have a question about the MY-PS-3 and is the answer not in the manual?
Questions and answers
I'm using a 7 10 dps,but it's not running my motor