Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
GKUX / GKU1 / GKU2 / GKU3
GKUT1 / GKUT3 / KPR KITS
Guide Max. Weight: 12kg
Revised 15/09/22
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol GKUX
Summary of Contents for Unicol GKUX
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
- Page 2 COMPONENTS DESCRIPTION NOTE: GKU1 Ceiling Fixing Plate & Arm GKUX is a close to ceiling version of the GKU1 and GKU1 Projector Fixing Plate & Arm has no telescopic arm. GKU2 is a GKU1 and comes with a separate extension arm to increase arm length if required.
- Page 3 01865 767676 sales@unicol.com www.unicol.com STANDARD STEP 1 STEP 2 Using the 4 mounting slots cut out on the ceiling Fix the Universal plate and telescopic section to plate, determine where you want to install, mark it the projector using the screws provided. Adjust and fix into position.
- Page 4 01865 767676 sales@unicol.com www.unicol.com TRUSS MOUNTED COLUMN MOUNTED STEP 1 STEP 1 Loosen the truss clamp to open it up. Place around Using the 4 ceiling mounting slots, as shown the truss, close the clamp and tighten until secure. above, determine where you want to install your mount, mark it and fix into position.