Table of Contents
Advertisement
...notes on signal source entry
Each piece of external equipment connected to your TV must have its own input socket. It
would also be easier, and more organised, if the external equipment connected also had its own
channel number. Signal Source entry allows us to tell the allocated channel what equipment is
connected to which socket. This would make the switching between normal operation and the
For example, if you want to connect a games machine to your TV -
1. connect to socket AV2 via a scart lead (see page 10).
2. give your games machine an empty channel number of its own.
3. if desired change this channel name (see page 23).
4. give this channel the correct AV signal source (in this case AV2 - option 2, page 26).
Press and hold the MENU button for 5
1
seconds. The INSTALL option in the
MAIN MENU appears.
Press the cursor down button to select
2
3
Once highlighted, accept selection.
Press the cursor down button to select
4
MANUAL SETUP.
5
Once highlighted, accept selection.
Use the cursor keys to move the
6
selection bar over the AV required
to be adjusted.
Once highlighted, accept the selection to
change the frequency and you will see the
7
selection bar turn red - it is ready to be
Select your method of signal source
8
entry using the up/down cursor buttons.
option 1
AV1 is the signal source used when connecting
external equipment (eg. VCR) through a scart lead
to the AV1 socket at the rear of your TV.
connected equipment much smoother.
INSTALL.
changed.
25
Advertisement
Table of Contents
