NC377 Paging Interface Adapter
Installation & Operating Instructions
Contents
Features ...........................................................................2
Finishing Up ....................................................................7
Log On .............................................................................8
Report Types ...................................................................8
Appendix ........................................................................... 10
SD Card Use .................................................................. 10
Cables ............................................................................ 10
Troubleshooting ............................................................ 11
Illustrations
ALPHA COMMUNICATIONS
Toll-Free Technical Line: 1-800-666-4800 • Phone: (631) 777-5500 • Fax: (631) 777-5599
Website: www.AlphaCommunications.com • Email: info@alphacommunications.com
3
The NC377 Paging Interface Adapter is used with TekTone
NC110, NC150 and NC200 hard-wired nurse call systems to
add radio pocket paging. The interface is connected between
the nurse call system and the radio pocket pager transmitter.
The NC377 Paging Interface Adapter detects calls, determines
priority, and then sends information to the NC369 Paging
Transmitter. Program call points so that calls are sent to the
appropriate pager. Information sent includes call type and room
number. The pager stamps the time and date.
This manual is designed to assist with installation of this
TekTone
with step-by-step instructions to facilitate hardware installation
and software configuration.
®
• 42 Central Drive • Farmingdale, NY 11735-1202
Figure 1-NC377/32 Paging Interface Adapter
Chapter 1-Introduction
About This Manual
®
product. Each component of the system is described
1. Important: Please take all precautions against high
voltage shock.
2. Use an ESD wrist strap when working with the SD or
Contact Input Cards.
3. Remove power from the unit before SD or input card
removal or replacement, and for wire installation.
IL871
Section E
Rev. 4 - 06/2011
®