Installation; Before Installation; Installation And Connection - Beko MSH30B User Manual

Mini oven
Hide thumbs Also See for MSH30B:
Table of Contents

Advertisement

3

Installation

Refer to the nearest Authorised Service
Agent for installation of the product.
Make sure that the electric and gas
installations are in place before calling
the Authorised Service Agent to have
the product ready for operation. If not,
call a qualified electrician and fitter to
have the required arrangements made.
The manufacturer shall not be held
responsible for damages arising from
procedures carried out by unauthorized
persons which may also void the
warranty.
Preparation of location and
electrical installation for the
product is under customer's
responsibility.
The product must be installed in
accordance with all local electrical
regulations.
Prior to installation, visually check
if the product has any defects on
it. If so, do not have it installed.
Damaged products cause risks
for your safety.

Before installation

This product is intended for use only on
a counter. Rear surface of appliances
should be placed against a wall.
Do not use the product in a
closed cabinet or on the floor
level.
The kitchen floor must be able to carry
the weight of the appliance plus the
additional weight of cookware and
bakeware and food.
• Any kitchen furniture next to the
appliance must be heat-resistant
(100 °C min.).
14/EN

Installation and connection

Product can only be installed and
connected in accordance with the
statutory installation rules.
Do not install the product next to
refrigerators or freezers. The heat
emitted by the product will
increase the energy consumption
of cooling appliances.
Do not use the door and/or
handle to carry or move the
product. The door, handle or
hinges get damaged.
Electrical connection
Connect the product to a grounded
outlet/line protected by a miniature
circuit braker of suitable capacity as
stated in the "Technical specifications"
table. Have the grounding installation
made by a qualified electrician while
using the product with or without a
transformer. Our company shall not be
liable for any damages that will arise due
to using the product without a
grounding installation in accordance
with the local regulations.
The product must be connected
to the mains supply only by an
authorised and qualified person.
The product's warranty period
starts only after correct
installation.
Manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorised persons.

Advertisement

Table of Contents
loading

Table of Contents