ROOM LIFE SIENNA Assembly Instructions

Queen bed head

SIENNA QUEEN BEDHEAD

INDOOR USE ONLY · FULL ASSEMBLY

H 120 CM x W 160 CM x D 9.5 CM

Frame: MDF, plywood, LVL and polyester fabric

Legs: Plastic

MADE IN MALAYSIA

Warning Do not use as a step ladder. Only use on even surfaces.

Product must be anchored to wall or other suitable surface to prevent

tipping. Failure to follow these warnings could result in serious injury.

CARE Lightly vacuum with brush attachment. Blot any spills with

a damp cloth, do not rub fabric. Do not use abrasive materials or

solvents. Wipe legs with a soft cloth. Store in a dry place.

Table of Contents

Do you have a question about the SIENNA and is the answer not in the manual?

Page 1 SIENNA QUEEN BEDHEAD INDOOR USE ONLY · FULL ASSEMBLY H 120 CM x W 160 CM x D 9.5 CM Frame: MDF, plywood, LVL and polyester fabric Legs: Plastic MADE IN MALAYSIA WARNING Do not use as a step ladder. Only use on even surfaces.
Page 2 ASSEMBLY INSTRUCTIONS A* 1 B* 1 C* 2 D* 1 E* 1 F* 1 Please read instructions carefully. Remove all wrapping material, staples and packing straps from the outer carton. Check the assembly guide to ensure you have all required components before you begin assembly.
Page 3 ASSEMBLY INSTRUCTIONS A* 1 B* 1 C* 2 D* 1 E* 1 F* 1 STEP 3 STEP 4 LACE THE END OF THE RESTRAINT STRAP THROUGH THE LARYER HOLE IN EACH MOUNTING BRACKET. BRING BOTH ENDS TOGETHER AND SLIDE THE FLAT END THROUGH THE LOCKING END AND DRAW IT THROUGH UNTIL ALL SLACK IS REMOVED.
Page 4 WAR N ING : It is STRONGLY RECOMMENDED that you ANCHOR this product. Toppling furniture can cause serious injuries and death. This product has been fitted with an anchor strap/bracket. To prevent your furniture from tipping forward it is strongly recommended that you securely attach this product to a wall or other solid surface, using the anchor straps provided and appropriate fixings.