Table of Contents
Advertisement
DELTA COMPONENTS GmbH
1.8 Safety regulations
Your new product of DELTA COMPONENTS GmbH has been carefully designed and tested to ensure
a long and flawless work. The DeltaVarioMon is not a consumer product. The connection and
commissioning must be performed by a trained professional.
Only a special purpose installation and connection of the DeltaVarioMon in specified use environments,
enabling trouble-free operation. For your own safety and the proper work with the new DELTA
COMPONENTS GmbH products following safety precautions have to be observed:
−
Precautions against electrostatic discharge
Electronic circuit boards and components are protected against static electricity. Especially when
unpacking and initial operation be aware of an unwanted static discharge (ESD). When working on
the device, especially when connecting cables, always pay attention on an ESD-compliant work
environment.
−
No use of faulty equipment
Before commissioning of the device please check that everything is OK. The use of defect parts
may endanger persons and property damage (electrical shock, short circuit). Therefore, defect or
damaged equipment should never be used. In this case, our customer service will help you with
any questions (support@delta-components.de).
−
Installation when the device is turned off.
Before installation the device should be turned off.
−
Power supply.
The nominal supply voltage of the device is 28 VDC. The device is therefore suitable for use in
Custom specific environment. The device is internally protected against reverse polarity by a diode
voltage and current spikes.
D E L T A C O M P O N E N T S G m b H Auweg 27, D-79761 Waldshut-Tiengen
Manual
DeltaVarioMon 12,1''
Page 7
Advertisement
Table of Contents
