1. Manuals
  2. Brands
  3. Teledyne Lecroy Manuals
  4. Industrial Equipment
  5. SFF-8639
  6. Quick start

Teledyne Lecroy SFF-8639 Quick Start

Dual port interposer for pci express 3.0
Hide thumbs
1
2

Advertisement

Table of Contents

1

Introduction

Use this document for quick installation and setup.
Teledyne LeCroy's SFF-8639 dual-port interposer card provides a quick and simple means for protocol analysis of Solid
State Drives (SSDs) based on PCI Express (PCIe
Protocol Analyzer, enables PCIe bus traffic between a host backplane and SSD device to be monitored, captured, and
recorded for protocol analysis. The card is compatible with the Summit T3-16, Summit T3-8, Summit T28 and Summit T24
Protocol Analyzers and supports data rates of 2.5 GT/s, 5 GT/s and 8 GT/s.
2

Components

The analyzer package includes the following components:
•
SFF-8639 dual-port interposer card
•
DC Power Adapter (12 volts)
Inspect the received shipping container for any damage. Unpack the container and account for each of the system
components listed on the accompanying packing list. Visually inspect each component for absence of damage.
In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper's inspection.
SFF-8639 Dual Port Interposer for
PCI Express
Quick Start
®
) protocols. The SFF-8639 Interposer dual-port Card, used with a Summit
SFF-8639 Dual-Port Interposer Card
®
3.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SFF-8639 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Teledyne Lecroy SFF-8639

  • Page 1 Quick Start Introduction Use this document for quick installation and setup. Teledyne LeCroy’s SFF-8639 dual-port interposer card provides a quick and simple means for protocol analysis of Solid ® State Drives (SSDs) based on PCI Express (PCIe ) protocols. The SFF-8639 Interposer dual-port Card, used with a Summit Protocol Analyzer, enables PCIe bus traffic between a host backplane and SSD device to be monitored, captured, and recorded for protocol analysis.
  • Page 2 Install the Interposer into the host system connector Note: The sequence of operations shown here is for "hot plug" operations where the host system powering the SFF-8639 host slot remains powered on. For test applications where this is not required, assemble the components as indicated (including plugging the interposer into the host slot), then power on all components (interposer, analyzers, and host machine for PETracer software) before powering on the SFF-8639 host slot.

Table of Contents