Download
Share
Print this page
Targa HT 5.1 AS Manual
  1. Manuals
  2. Brands
  3. Targa Manuals
  4. Speaker System
  5. HT 5.1 AS
  6. Manual

Targa HT 5.1 AS Manual

5.1 surround-sound system
Hide thumbs

Advertisement

Quick Links

Download this manual

Advertisement

loading

Summary of Contents for Targa HT 5.1 AS

  • Page 2: Table Of Contents

    SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS • Read and keep these instructions available for future reference. WARNINGS • For indoor use only. • The unit must only be connected to a suitable mains power supply using the mains power lead provided. •...

  • Page 3: Control Locations

    Thank you PACKAGE CONTENTS Dear customer: 1 AV Sub cabinet Thank you for purchasing our product. Please take a 1 Power cable moment to read the instructions in this manual, Following 1 Single lotus line these instruction will enable you to obtain optimum performance and listening enjoyment from this product.

  • Page 4: Getting Started

    GETTING STARTED 1. CONNECTION OF AUDIO SIGNAL VIA SINGLE PHONO CABLE FORM AN TheTARGA 5.1 Spraker System is an ideal accessory to accompany a DVD home cinema system or Hi-Fi system. A INDEPENDENT SUBWOOFER OUTPUT subwoofer can be used along with any amplifier, whether An independent subwoofer phono output can be found it be Dolby Digital/DTS or stereo, to provide a fuller and on most AV amplifiers and some DVD players.

  • Page 5: Connection

    You can also connect to one channel of any line output 2. CONNECTION OF AUDIO SIGNAL VIA of a DVD/Amplifier to enjoy bass reinforcement. (HIGH-LEVEL) SPEAKER CABLES. If your audio equipment does not have an independent subwoofer output, then it is possible to extract the lower frequencies form the amplifier speaker outputs.
  • Page 6 NOTE: When connecting speaker cables, please ensure PLACEMENT OF SUBWOOFER that the polarity is correct (connecting a positive cable The placement of a subwoofer speaker doesn’t carry as to a negative socket or vice versa will result in your speaker much importance as when positioning standard speaker.

  • Page 7: Using The Controls

    USING THE CONTROLS 2. FILTER The FILTER control (see image 2) determines which The AV SUB has a number of controls to customise the frequencies the subwoofer will reproduce. Setting the sound coming from the subwoofer. control to the 40Hz position will only allow the very low 1.

  • Page 8: Troubleshooting

    TROUBLESHOOTING SPECIFICATIONS Mains input: 220-240 volts 50/60Hz, fuse 1 Amp Power output: 75Watts RMS - 10% THD PROBLEM SOLUTION NO power Mains fuse has blown. Change fuse in Frequency range: 40Hz - 150Hz mains plug. Fuse in unit has blown. This will need to be changed by a qualified repair technician.