Fan Function - Ventus LRG04-18JR Instruction Manual

FAN FUNCTION

When the unit is turn on, the fan starts to work. You can use the unit as purifier or just to blast
air at ambience temperature.
COOL/HUMIDIFIER FUNCTION
Ventus Dual Tech has a security system that turns off the appliance if
very low water level during Cool Function to avoid damage to parts.
Open the Water Filler lid and add clean water into the water tank by pouring water directly
into the filler. Keep an eye on the water level indicators Min and Max to make sure that you do
not OVER or UNDER FILL the unit. Close the Water Filler lid.
With the unit already turn on, press the button COOL, the water circuit turns on and the unit
starts to blow cool air. The display will show the Cool icon.
If you press the button COOL again, the water circuit stops and the unit returns to FAN function.
If you find that the air is still not cool enough, you can add the previously freezed for 1 or 2
hours Ice Boxes or ice blocks into the water tank. Unlock the water tank knob my moving it
upwards and extract the water tank no more than 15 cm. Insert the water tank into the unit
and lock the knob moving it downwards.
You can also add clean water to the water tank when it is extracted.
7