Optelec Compact Go Instructions Manual
  1. Manuals
  2. Brands
  3. Optelec Manuals
  4. Battery Charger
  5. Compact Go
  6. Instructions manual

Optelec Compact Go Instructions Manual

Wireless charger
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Use Instruction
FOR
Wireless Charger of Compact Go
IMPORTANT INSTRUCTIONS
When using this product, basic precautions should always be followed,
including the following:
- Read all the instructions before using the product.
- Do not press this product without proper protection, otherwise it may damage
it.
- This product is intended for use in class 2 or LPS circuit in the final products.
- Do not clear this product with wet cloth and the like.
- Do not disassemble or modify this product in any way.
- Do not locate at wet place, always ensure this product is used in a dry
location area.
- For indoor use only.
- To avoid risk of fire, do not expose this product to excessive heat or direct
sunlight.
- Use the product in environments where the temperature is between 10℃
and 35℃.
- To avoid the risk of electrical damage, keep this product away from fluids and
chemicals.
- Always unplug the product before cleaning. Use a cleaning cloth or a soft
damp cloth to clean the exterior. Do not use cleaning agents or abrasive
material, as they will damage this product.
SAVE THESEINSTRUCTIONS
PRODUCT DESCRIPTION
Main Mechine
Proudct name: Wireless Charger of Compact Go
Product model/Type: Wireless Charger of Compact Go
Wireless Output: 5W
Power adapter (Not including with the product)
Input: 100-240V ac. 50/60Hz
Output: DC 5V 3.0A
Page 1 / 9

Advertisement

Table of Contents
loading

Summary of Contents for Optelec Compact Go

  • Page 1 SAVE THESEINSTRUCTIONS PRODUCT DESCRIPTION Main Mechine Proudct name: Wireless Charger of Compact Go Product model/Type: Wireless Charger of Compact Go Wireless Output: 5W Power adapter (Not including with the product) Input: 100-240V ac. 50/60Hz Output: DC 5V 3.0A...

  • Page 2: General Description

    Max. Operating ambient temperature: 35 ° C or higher Operation altitude: Up to 5000m LPS output Approved by IEC 62368-1 & EN 62368-1 GENERAL DESCRIPTION Mode Button Zoom In Zoom Out Freeze Button LED Light Camera LED Light Handle Page 2 / 9 USB-Type C Charging indicator HDMI Port...
  • Page 3 There are two charging methods: wireless charging and wired charging. Wireless Charging: Connect the adapter with the wireless charger. Put Compact go on the wireless charger and make sure the camera is in the camera slot, and the handle in the handle slot. Handle...

  • Page 4: Basic Operation

    then the product will be shut down. BASIC OPERATION 1. Open the Handle Swing out the handle clockwise on the back of the Luna 6. Within 0° to 180° , the handle can stay at any position. Open the handle according to the illustration in the figure below.

  • Page 5: Save An Image

    Press the Freeze button to capture an image. Press the Zoom in or Zoom out buttons to change the magnification level of a frozen image, or Mode button to change colors. 5.2 Panning You can use panning function to pan magnified images by moving them vertically and horizontally across the display area to view specific areas of the image.
  • Page 6 Screen Brightness LED Light Reading Line or Masks Intensity of Contrast Intensity of Contrast Gallery System settings 1.1 LED Lights Press THE MENU key TO OPEN the main menu, select the light icon, press the color mode key once to open the light, and press the light again to close it 1.2 Screen Brightness Choose this option to adjust the screen brightness.

  • Page 7: System Settings

    through five reading lines and masks options. Once it’s done, press the Freeze button or Home button to exit. In real-time view, you can also press Zoom in and Zoom out buttons to activate reading line and masks. Hold the Home button and press Zoom in/Zoom out button simultaneously to adjust the line position or the width of reading masks.
  • Page 8 Sound Firmware Version Time setting Power Saving Refresh Rate Restore Factory Settings 1.6.1 Sound The sound screen has four options, which are off, low, medium, high, and medium by default. 1.6.2 Firmware Version This option shows the software version of this product. 1.6.3 Time setting It can set operation duration through it.

  • Page 9: Other Operation

    The default refresh rate is 60Hz. 1.6.6 Restore Factory Settings Use this function to restore the factory settings of this product. OTHER OPERATION Connect to TV or Monitor To view images on a larger screen, use the supplied HDMI cable to connect this product to an HDMI TV or monitor.
  • Page 10 FCC statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 11 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

Table of Contents