Page 2
3.3 Starting the Software ..........................4 3.4 Using the Software ............................. 4 3.5 Updating the Software..........................4 4. Using the Baby Manikin Training System ....................4 5. Re-adjusting Face Piece and Holder ......................5 6. Cleaning and Disinfection ..........................6 7.1 Cleaning of the Skull, Neck and Body ......................
Page 3
3. Connect the USB cable to the baby and to your computer. The driver should load in about 60 seconds. The SmartMan Baby is connected to the computer via a standard mini USB cable. The plug is on the left hip of the baby when it is facing you. Line up the mini USB plug and push it firmly into the connector.
Page 4
3.1 USB Connector The SmartMan Baby is connected to the computer via a standard mini USB cable. The plug is on the left hip of the baby when it is facing you. Line up the mini USB plug and push it firmly into the connector.
Page 5
If so repeat the procedure. 4. Using the Baby Manikin Training System The SmartMan Baby and Neonate systems are designed to meet all the training recommendations of the American Heart Association (AHA). However, it is recommended that instruction should be based on the techniques and provisions applicable in jurisdiction where instruction takes place.
Page 6
This is the connector for the Pull up one edge first and then face piece and the head. It remove the rest. To replace, should be snug without reverse the process leakage SmartMan Baby and Neonate Manikin Training Systems - pg. 5...
Page 7
The face pieces can be washed automatically. Apply a normal amount of detergent and choose a washing program with a maximum temperature of 65°C. Allow items to dry before storing. SmartMan Baby and Neonate Manikin Training Systems - pg. 6...
Page 8
7.1 Cleaning of the Skull, Neck and Body The skull, neck, body, arms and legs of the SmartMan Baby should be wiped over with a cloth moistened in a mild detergent and then wiped over with a cloth moistened in clean water. The training manikin must not be submerged in water nor should water be allowed to enter the internal parts.
Need help?
Do you have a question about the Baby Manikin and is the answer not in the manual?
Questions and answers