Summary of Contents for Parrot CD0085
- Page 1 Commercial Display Screen 85" | 100" - CD0085 | CD0100 User Manual Tel: (RSA) 010 140 4900 / Email: sales@parrot.co.za www.parrot.co.za...
- Page 2 Disclaimer When there is one of the following situations, the free warranty obligation during the warranty period is not assumed. Cannot provide valid proof of purchase Tear off or damage the disassembly label without permission Hardware damage caused by improper assembly Product damage caused by abnormal external force Product damage caused by exceeding the allowable use environment Product damage caused by unauthorized modification or self-repair...
-
Page 3: Table Of Contents
Contents 1.Product Introduction 2.Device installation 3.Specification model 4.Monitor structure diagram and function description 5.Instructions for using the remote control 6. Safety precautions 7.Common fault handling 8. Maintenance... -
Page 4: Product Introduction
1.Product Introduction • Full hardware architecture, no CPU and operating system; • Multi-bus parallel processing, powerful processing function; • Fast start up time - less than 8 seconds; • Good security - no risk of virus infection; • Integrated multi-channel video signal source types: DVI, HDMI, DP, composite video, VGA;... -
Page 5: Device Installation
2. Device installation Install wall mount 1.Please install the Mobile stand or the wall mount brack on the wall according to the installation instruction. [Installation Precautions]: When installing the wall bracket, make sure that the wall can bear the load. The picture is for reference only, subject to the actual product Bracket... -
Page 6: Specification Model
3.Specification model Display parameters 85" 100" Screen size Backlight type D-LED Resolution 3840*2160 Brightness 350cd/m² Frame rate 60Hz Image ratio 16:9 Chromaticity 1.07B(8bit) ≥30,000hrs Life Perspective 178°(H)/178°(V) Viewing area 1872(H)×1053(V)mm 2203.2(H)×1239.3(V)mm 4MM explosion-proof tempered glass Touch surface Interface parameters DP in * 1, HDMI in * 1, DVI in * 1, VGA in * 1, AV in * 1, Rear interface USB interface * 1, USB interface (Unicom and built-in USB) * 1 Power parameters... -
Page 7: Monitor Structure Diagram And Function Description
4.Monitor structural schematic diagram and function description Nameandfunctiondescriptionofeachpart Functiondescription No. Name Theinfraredreceivingwindowthatacceptsremotecontroloperations. [Indicatorlight] [AC socket] 110V-240V AC power input socket. [AC switch] External AC power input ON/OFF switch. Input the external DP device signal to realize the same screen display of the device and [DP-IN] the external monitor Input the external HDMI device signal to realize the same screen display of the device... -
Page 8: Instructions For Using The Remote Control
5. Instructions for using the remote control Batter y compar tment (3V batter y) - Page 9 Remote control function description Button Function Description Power-off Power off Power-on Power on Mute Mute VIDEO Switch video channel Switch VGA channel Switch DVI channel (no such channel) Switch HDMI channel HDMI Up navigation key [Note 3] DOWN Down navigation key [Note 3] LEFT Left navigation key [Note 3] RIGHT...
- Page 10 5.1 Chanel switching menu 5.2 “MENU” menu...
- Page 11 “Screen Adjustment” menu: “Settings” menu:...
- Page 12 5.3 Description of Factory Menu...
-
Page 14: Safety Precautions
6. Safety precautions (1) Please read this manual carefully; (2) Keep this manual for future use; (3) Check whether there is any abnormality inside the equipment before opening the equipment; (4) Be careful not to step on or cover the power cable; (5) Please cut off... -
Page 15: Common Fault Handling
It can be eliminated according to the following steps. If the problem still cannot be solved, please contact Parrot Products. Products that have been repaired by themselves are not covered by the company's warranty. -
Page 16: Maintenance
8. Maintenance The importance of maintenance: Maintenance can prevent small problems from becoming big problems and ensure the safety of the machine. Maintenance can maximize the performance of the machine and achieve a longer service life. Maintenance tools: A clean lint-free cloth, such as a dust-free cloth. Cleaning agents, such as industrial alcohol Maintenance measures: Before maintenance, turn off... - Page 17 Develop good machine habits When the machine is not in use, please turn off the power I/O switch or unplug the AC power cable. If you do not use the machine for a long time, please wrap it in a protective cover and store it in a cool and dry place. Name and content of toxic and hazardous substances or elements in the product: 0: Indicates that the content of this toxic and hazardous substance in all...