Design by Mr. K ONE LPS LPS-06 Owner's Manual

High quality linear power supply with anti-common mode noise

Advertisement

Quick Links

High Quality Linear Power Supply With
Anti-Common Mode Noise
Model No.: ONE LPS LPS-06
Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ONE LPS LPS-06 and is the answer not in the manual?

Questions and answers

Summary of Contents for Design by Mr. K ONE LPS LPS-06

  • Page 1 High Quality Linear Power Supply With Anti-Common Mode Noise Model No.: ONE LPS LPS-06 Owner's Manual...
  • Page 2: Get Started

    Warning 1)Installation and service should be performed only by qualified and experienced technicians and comply with all local codes and rules to maintain your warranty. 2) To reduce the risk of fire or electric shock, do not expose the product to rain or moisture. 3) Do not apply benzene or thinner to the case, which may cause the surface of unit to be melted or fogged.
  • Page 3: Pack Contents

    , and no any parts can be repaired by user . NOTE : the ONE LPS LPS-06 is an equipment for industry , it should be worked under 20°C room temperature , and when loaded over 50% full loading , recommended operating environments with very good ventilated equipment cabinet or compartment &...
  • Page 4: Ac Mains Voltage

    Brazil, AC voltages differ by region. Most other countries require setting it to 230V. With the 230V setting the ONE LPS LPS-06 can operate safely with AC line voltages between 220-250V. If the AC Voltage Selector is changed the rear panel fuse value must also be changed.
  • Page 5: Installation Instructions

    • Place the ONE LPS LPS-06 on a surface that will adequately support its weight. • Use input and output cables that are long enough to leave some slack; that will enable you to pull the ONE LPS LPS-06 out of a cabinet to check or to change connections without inadvertently disconnecting cables.
  • Page 6: Specifications

    & the brightness of Meter Panel back light can be programmed to adjust . When power on your ONE LPS LPS-06 first time , turn on the o/p channel selected by you , then press & hold PROG switch button...
  • Page 7 Meter Panel Brightness Control M ode • When main power on ,the meter panel lamp & LED lighting on with 100%brightness , the brightness changed to 80% after pressing DIM button once , and then changed to 10% after pressing DIM button once again ; and the meter panel lamp lighting on with 100% brightness &...
  • Page 8: Warranty And Contact Details

    LED indicator lighting on even though main power switch OFF & then ON . Warranty and Contact Details The ONE LPS LPS-06 is covered by a two years warranty plan from the date of purchase under normal circumstances. • Warranty Coverage The warranty provided by our company in this statement applies only to product purchased from our authorized distributors and authorized resellers.
  • Page 9 • Contact Details If you believe you need warranty service, please contact us through the following means: Telephone: (+852) 2889 1924 : (+852) 2889 2493 E-mail info@designbymrk.co m https://www.facebook.com/Design-by-Mr-K- Facebook: 386812875128890 Website : www.designbymrk.com Preliminary instruction manual. Data changed without notice. Date: 1 September 2022.

Table of Contents