Table of Contents
Advertisement
19. The counterweight on the front of the jib boom is to adjust its balance. It should balance with
the CG (center of gravity) on SR7. To balance the boom, the counterweight can be easily moved
either in or out as needed.
20. Move the bowsie on the
front jib sail rigging to maintain
a slight bend in the mast. The
dotted line in the drawing to
the right is an exaggerated
example of what the bend
should look like. The actual
bend should be less
pronounced than the drawing
shows.
21.Move the bowsie attached
to the jib sail grommet to
tighten or loosen the jib sail.
22.Move the bowsie at the
rear of jib sail to tighten or
loosen the jib sail leg.
23.Move the bowsie on the
foredeck to adjust the
distance between the jib
boom and deck.
9 / 16
Advertisement
Table of Contents
