Pramac HX10M Manual

HX10M 1150X540
HIGH LIFT PALLET TRUCK - MANUAL
HX10 M
The HX10M scissor lift makes possible an easy and light lifting to a height of 800 mm,
becoming a practical work platform, suitable for places such as machine workshops.
This pallet truck is also able to carry out the support function and material
supply along the assembly and production lines.

CONTROL LEVER

The handle offers an ergonomic tiller and a 3 positions control lever.
The special lowering valve allows you to smoothly lower the load.

HYDRAULIC UNIT

Resistant and reliable one piece cast iron pump including:
• TWO-STAGE TELESCOPIC LIFTING PISTON: to allow working with low profile frame
granting lightness and better operator visibility.
• MAXIMUM PRESSURE VALVE: safety device that ensures the transpallet against
overloads. When the pressure inside the hydraulic circuit exceeds the set calibration
value according to the maximum nominal flow, the valve automatically locks the forks.
• PROPORTIONAL LOWERING VALVE: lowering speed can be proportionally
controlled according to the lever position on the tiller. Perfect working tool to carry
fragile and delicate loads like crystal, glass and ceramics.

FRONT AND REAR STABILIZERS

The new control linkage makes possible the entry on the closed side of the pallet by a
slight lifting, which facilitates the successive handling phases.
Furthermore, greater machine stability is achieved by using load rollers in a more
advanced position and providing front stabilizers as standard.
Work is made even more stable and safer with the rear stabilizers, also when the
working height exceeds the 400 mm and in the case of heavy objects.