Advertisement
the complete wheel is balanced. Normally, you need only one of the two weighting weights. The
weight must be applied until the complete wheel remains in the rest position. In doing so, you
should be careful to use as little weight as possible, the weight should be evenly distributed on
both sides of the rim. If a total weight of more than 50 g is required, then you should reclaim the
tyre.
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.
https://www.XPOtool.com
The Tool Experts
Item 51742
Page 5
08 2022-1
Advertisement
