Advertisement
Cimco
CIMCO ELECTRONICS, INC.
www.cimcoelectronics.com
E-MAIL: cimco@cimcoelectronics.com
Description
Standard Instructions
Operating Control Panel
Monitoring Features
Contact Cimco for details
Series 21 - Operator Instruction Manual
INDEX
www.cimcoelectronics.com
Page 1 of 6
Cimco Drawing #
(for reference only)
5-28-99
Figure 1
10-21-96-A
Operator Instructions-21-January 2002-Rev 4
Series 21
26 MAIN STREET; P. O. BOX 248
WEST MIDDLESEX, PA 16159
PHONE (724) 528-9559
FAX (724) 528-1108
Page
2,3
4
5,6
Advertisement
Table of Contents
Summary of Contents for CIMCO 21 Series
- Page 1 FAX (724) 528-1108 Series 21 - Operator Instruction Manual INDEX Description Cimco Drawing # Page (for reference only) Standard Instructions 5-28-99 Operating Control Panel Figure 1 Monitoring Features 10-21-96-A Contact Cimco for details www.cimcoelectronics.com Operator Instructions-21-January 2002-Rev 4 Page 1 of 6...
- Page 2 Alarm and fan relays revert to “on-state” if thermocouple is open or, Alarm and fan contacts revert to”on-state” if power is lost. Options Each option has dedicated instructions. Contact Cimoc if not supplied with instrument. Contact Cimco for details www.cimcoelectronics.com Operator Instructions-21-January 2002-Rev 4 Page 2 of 6...
- Page 3 Connects are dry. Alarm relay is fail-safe. Trip relay is NOT fail-safe. Obtain permission from the transformer manufacturer before changing any programmable features. Contact Cimco for programming instructions. Contact Cimco for details www.cimcoelectronics.com Operator Instructions-21-January 2002-Rev 4 Page 3 of 6...
- Page 4 = Display and control / buttons TRIP ON SET-POINT ON - OPTIONAL SET-POINT ON - OPTIONAL = LED’s SET-POINT OFF - OPTIONAL SET-POINT OFF - OPTIONAL TRIP OFF ALARM OFF FAN OFF Contact Cimco for details www.cimcoelectronics.com Operator Instructions-21-January 2002-Rev 4 Page 4 of 6...
- Page 5 7. Erase maximum tempearture memories. condition clears. 1. Maximum temperature memories include 2. Press button 2 to reset all MTM’s to zero. 1. Three phases 2. Highest of all three phases. Contact Cimco for details www.cimcoelectronics.com Operator Instructions-21-January 2002-Rev 4 Page 5 of 6...
- Page 6 9. Alarm set-point off 190 degrees C displayed. 10. Fans set-point off 180 degrees C 1. 10's decimal point will blink. 13. Cimco Electronics can program special default 2. Fifth set-point relay will turn off. settings upon request. 8. Optional fourth set-point off temperature is displayed.
Need help?
Do you have a question about the 21 Series and is the answer not in the manual?
Questions and answers
How do you change the set points for **** on, alarm and trip on the Cimco Series 21 control
The manual does not provide direct instructions for changing the set points for alarm and trip. However, it mentions that changes to programmable features should only be made with permission from the transformer manufacturer and that Cimco should be contacted for programming instructions.
This answer is automatically generated