Summary of Contents for Feider Machines FMT20V-A
- Page 1 ORIGINAL INSTRUCTIONS >EN CORDLESS MULTI-TOOL FMT20V-A USER GUIDE CAUTION: Read this manual before use this machine!
-
Page 2: Table Of Contents
CONTENTS 1. INTENDED USE 2. SAFETY INSTRUCTIONS 3. YOUR PRODUCT 4. PACKAGE CONTENT LIST 5. ASSEMBLY 6. OPERATION 7. CLEANING , MAINTENANCE AND STORAGE 8. TECHNICAL DETAILS 9. DISPOSAL 10. DECLARATION OF CONFORMITY 11. WARRANTY 12. PRODUCT FAILURE 13. WARRANTY EXCLUSIONS... -
Page 3: Intended Use
1. INTENDED USE This multi-function tool is intended for sanding, cutting and scraping on wood, plastic, gypsum and metal. It is designed for domestic use and is not designed for commercial, trade or industrial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. - Page 4 b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
- Page 5 c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery;...
- Page 6 Injuries caused by touching any rotating/moving parts. Injuries caused when changing any parts, blades or accessories, Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. Impairment of hearing. ...
-
Page 7: Your Product
2.5 SYMBOLS Conforms to relevant safety standards To reduce the risk of injury, the user must read and understand this manual before using this product. Wear eye protection. Wear breathing protection. Wear hearing protection Do not dispose of old appliances with domestic rubbish 3. -
Page 8: Package Content List
4. PACKAGE CONTENT LIST Remove all packaging materials. Remove remaining packaging and packing inserts (if included). Check that the package contents are complete. Check the appliance, the power cord, the power plug of charger and all accessories for transportation damage or not. -
Page 9: Operation
6. OPERATION 6.1 CHARGING THE BATTERY PACK NOTE: The battery and charger not delivered in package, you can buy Buider battery platform 1 which used for full range. 1). Take the battery pack out of the equipment. Do this by pressing the side pushlock buttons. 2). - Page 10 The temperature of battery is too high or too low, the charger is under protection status. The charging function can be recovered after the temperature is normal. Unrecoverable battery malfunction. 6.3 INSERTING AND REMOVING THE BATTERY WARNING: Before making any adjustments ensure the drill is switched off with the direction of rotation selector in the center position Remove the battery: press the battery release latch in and at the same time pull the battery pack off.
-
Page 11: Cleaning , Maintenance And Storage
6.8 SAWING OR CUTTING a) Attach the blade (10) to the multi-function tool. b) Ensure the workpiece is securely held down and the plunge blade (10) is secure. c) Switch on the multi-function tool and use a slight pendulum motion while cutting. 6.9 SCRAPING a) Attach the scraper (11) to the multi-function tool. -
Page 12: Technical Details
8. TECHNICAL DATA Rated voltage (direct current) 20V d.c. Oscillation 5000-18000/min Oscillation Angle: 3° Battery type Recommendation of battery to use: Model: FBA20U2 or FBA20U4 20V d.c. 2Ah or 4Ah Recommendation of charger to use: Charger type Model: FFC20EU Input 220-240V~ 50/60Hz,0.6A max Output 20V d.c., 2A Pression acoustique L 83dB(A),dB(A), K= 3 dB(A) -
Page 13: Declaration Of Conformity
BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France, declares that, Product: Angle Grinder 20V Trade mark: FEIDER Model: FMT20V-A Serial number: 20211004969-20211005468 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. -
Page 14: Warranty
BUILDER SAS 32, rue Aristide Bergè s - ZI 31270 Cugnaux - France MADE IN PRC...
Need help?
Do you have a question about the FMT20V-A and is the answer not in the manual?
Questions and answers