Page 1
INSTRUCTION MANUAL Smart ZigBee LCD Temperature and Humidity Sensor E6 You will need Nous Smart Home App. Scan the QR code or download it from direct link Register with your mobile number/E-mail then login ZigBee Hub/Gateway E1 is required Know about the sensor...
Page 2
Button Enter configuration mode: Press and hold the button for 5 seconds until the screen blinks, the device will enter configuration mode Shift C/F: Double-click to cycle switching between °С and °F temperature unit Trigger to report: Single-click to report its current status to cloud server Screen...
On the back Quick Installation Guide Note: the smart gateway must be added first before adding the sub-device. 1.Power on the sensor 1).Open the battery cover...
Page 4
2).Insert the battery into the battery compartment (please note battery positive and negative) 3).Close the battery cover 2.You will need Nous ZigBee GateWay/Hub. Open “Nous Smart Home” app, Enter the gateway homepage and click “Add subdevice”...
Page 5
3.Press the reset button for 5 seconds, till the screen blink, then click the confirm button which shows and "LED already blink" follow the in-app instructions to connect the sensor to your gateway. 4.Waiting for a few seconds, This device is added successfully and you may rename it. Click “Done”...
Page 6
5.Put it where you need it. 6.Nous Smart Home app settings: 1).The temperature unit setting 2).The temperature update sensitivity setting...
Page 7
3).Limits setting of Low temperature alarm and High temperature alarm.
Need help?
Do you have a question about the E6 and is the answer not in the manual?
Questions and answers