Advertisement
6. TROUBLESHOOTinG
THE PROBLEM
Unit works well but no change in light status when the adaptor is
connected to the RoadStart unit.
When the adaptor is plugged into the roadstart unit all LEDs light.
When the adaptor is unplugged and the test button depressed, no LEDs
light.
Roadstart unit is fully charged but delivers no power.
When trying to use an accessory via the dc outlet, a clicking sound
is heard inside the RoadStart unit.
7. QUESTiOnS & AnSWERS
QUESTiOn
How many jump starts can a fully charged
RoadStart do before needing to be recharged?
Can the RoadStart be recycled?
What is the ideal in-use storage temperature
of the RoadStart?
I have a regular 10 amp battery charger, can I use it
to recharge the RoadStart?
Is the RoadStart fool proof?
Can I replace the internal batteries?
8. DECLARATiOn OF COnFORMiTY
Declaration of Conformity
Roadstart Unit Model no's. R103, R104, R105
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
93/68/EEC CE Marking Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
iMPORTAnT: No liability is accepted for incorrect use of product.
WARRAnTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inFORMATiOn: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including
postcode.
Between 1 and 20 depending upon operating factors such as temperature, general
condition of the vehicle, engine type and size.
Yes, in accordance with national and local authority regulations.
Room temperature. The RoadStart will also operate at temperatures below zero, its
power however will be lessened. Intense heat will activate self-discharge.
No. Only the supplied adaptor and charger can be used.
No. All jump starting instructions must be followed carefully.
Yes, but note that the batteries are not covered by warranty as they are consumable
items.
We, the sole importer into the UK, declare that the product listed below is in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected, by a national
authority, upon request to Jack Sealey Ltd.
Sole UK Distributor ,
Sealey Group,
Bury St. Edmunds, Suffolk.
THE SOLUTiOn
Possible defective battery or faulty breaker. Use a device such as a
light with a dc plug to check that it works. If the light works, the power
source breaker is serviceable and the battery is defective.
Roadstart unit battery defective which could have been caused by
intense use without a cool-down period.
Check where the wires meets the jaw on the unit clamps. Ensure they
are well crimped.
If the unit has a power switch, ensure that it is in the ON position.
The accessory is drawing too much current, resulting in the internal
circuit breaker switching between ON and OFF.
AnSWER
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
01284 757500
01284 703534
24th October 2008
www.sealey.co.uk
Web
sales@sealey.co.uk
e-mail
RS103, RS104, RS105
Issue No: 2 - 24/10/08
Advertisement
